468: Difference between revisions

Revision as of 13:28, 9 December 2022

Tektronix 468

10/100 MHz Digital Storage Scope

Produced from 1980 to 1985

Manuals

ROM Images

(All manuals in PDF format unless noted otherwise)

The Tektronix 468 is a digital/analog scope, essentially a 465B with an added 25 MS/s 8 bit digitizer. The 468 uses the 154-0731-00 CRT.

The 468 is controlled by an Intel 8085A processor.

Bandwidth	100 MHz analog, 10 MHz digital repetitive, 2.5 MHz digital single-shot
Deflection	5 mV/Div to 5 V/Div, 1–2–5; CH1-CH2 cascaded – 1 mV/Div, 50 MHz
Sweep	20 ns/Div to 50 ms/Div (B) or 500 ms/Div (A), 1–2–5, ×10 magnifier to 2 ns/Div
Sampling rate	25 MS/s
Resolution	8 bit
Input impedance	1 MΩ // 20 pF
Power	90–210 V, 108–132 V, 198–242 V or 216–250 V; 48–440 Hz
Dimensions	18.3 cm × 29.2 cm × 55 cm (H×W×D)
Weight	15 kg (33 lb)
Options	Opt.02 − GPIB (A17 board) Opt.04 − EMI shielding Opt.05 − TV Sync Separator (A29 board) Opt.11 − Analog X-Y/Plotter Output (A27 board) Opt.12 − Averaging - Standard on SN B032430 and up. Opt.A2 − Operator's Manual says this is a 3 meter power cord. The Service manual shows that it's a power cord with UK plug.

→ see 468/Repairs page

Page	Part nos	Description	Designers	Used in
154-0731-00	154-0731-00 • 154-0731-01 • 154-0731-02 • 154-0731-04	CRT		Telequipment D75 • 455 • 465 • 465B • 468

Page	Model	Part nos	Description	Designers	Used in
155-0022-00	M036	155-0022-00 • 155-0022-01	analog multiplexer	Gene Andrews	147 • 148 • 149 • 335 • 468 • 1430 • 1441 • 1461 • 1900 • 1910 • 2220 • 2221 • 2230 • 5223 • 5403 • 5440 • 5441 • 5443 • 5444 • 5A38 • 7313 • 7403N • 7503 • 7504 • 7514 • 7603 • AN/USM-281C • 7613 • 7623 • 7623A • 7633 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • R7912 • 7912AD • 7912HB • 7904 • R7903 • 7904A • 7934 • 7A12 • 7A18 • 7A18A • 7A18N • 7B52 • 7B53N • 7D10 • 7D11 • 7D12 • NT-7000 • P7001
155-0078-00	M084	155-0078-xx • 155-0273-00 • 155-0274-00	broadband amplifier	John Addis	464 • 465 • 466 • 468 • 475 • 475A • 475M • 485 • 7834 • 7844 • 7854 • 7904 • R7903 • R7912 • 7912AD • 7912HB • 7104 • 7A16A • 7A16P • 7A24 • 7A26 • 7A42 • 067-0587-01 • 067-0680-00 • AM503 • PG502 • PG508 • DC510 • DC5010 • FG5010
155-0115-00	155-0115-00	155-0115-00	vertical amplifier		335 • 464 • 465 • 465B • 466 • 468

@@ Line 39: / Line 39: @@
 {{Spec | Options |
 * Opt.02 − GPIB (A17 board)
-* Opt.04 − (Not sure yet - seen on a scope - Opt 4 on a 465B is EMI shielding)
+* Opt.04 − EMI shielding
 * Opt.05 − TV Sync Separator (A29 board)
 * Opt.11 − Analog X-Y/Plotter Output (A27 board)
-* Opt.A2 − (Not sure yet - probably variant GPIB - seen on a 468 scope)
+* Opt.12 − Averaging - Standard on SN B032430 and up.
+* Opt.A2 − Operator's Manual says this is a 3 meter power cord. The Service manual shows that it's a power cord with UK plug.
 }}
 {{EndSpecs}}