TR502

Manuals – Specifications – Links – Pictures

The Tektronix TR502 is a 1.8 GHz tracking generator plug-in for the TM500 system.

The TR502 is intended to work with the 7L13 and 7L14 spectrum analyzer plugins from the 7000 series. It also works with a 7L12.

The TR501 and TR502 are essentially the same instrument with the exception of the output attenuators and logic interface in the TR502, which adds dot marker support for the 7L13 via the TRACK GEN LOGIC connector. A 012-0648-00 cable with 6-pin LEMO Connectors is required for this functionality. The TR503 is similar but has different oscillator and intermediate frequencies (see link).

Freel Telewski was Program Manager for the TR502 projcct. Assisting in electrical designe were Glenn Batenman, Michael McMahon, David Morton, and Phillip Snow. The mechanical design team included Carlos Beeck, Jack McCabe, and Leighton Whitsett.

Key Specifications

Frequency range	100 kHz to 1.8 GHz
Maximum output level	0 dBm ±0.5 dB
Level range	0 to –59 dBm
Level flatness	±0.65 dB

Compatible Counters

The TR502 provides an auxiliary RF output to be used with counters. For accurate measurement of the marker frequency while sweeping, the counter needs to be gated from the TR502 and 7L13. Compatible counters are the DC508 Option 7 or a DP501 prescaler combined with a DC509, DC5009, DC510, or DC5010. For the elaborate interconnects required see the figure below.

Links

• Tektronix TR502 @ barrytech.com
• Tektronix TR502 @ radiomuseum.org
• Converting a TR502 to a TR503 configuration

Prices

Year	1976	1980	1988
Catalog price	$4,500	$5,220	$7,080
In 2022 Dollars	$22,400	$18,000	$17,000

According to an internal memo, in 1979 annual sales were estimated at 42 units.

Pictures

• 
• 
• 
• 
• 

  TR502 block diagram

• 

  Rear interface interconnects required for pairing with DP501 and compatible counter.