4052

The Tektronix 4052 is a graphics-capable desktop microcomputer produced by Tektronix in the late 1970s through the early 1980s. The display technology is similar to the Tektronix 4010 terminal, using a vector-driven direct-view storage CRT display (like an analog storage scope) to avoid the need for video RAM. The 4052 is an all-in-one design, with the display, keyboard, CPU and DC300 quarter-inch cartridge tape drive in a single desktop case, and includes a GPIB interface. A simple operating system and BASIC interpreter is included in ROM.

Manuals – Specifications – Links – Pictures

The storage tube display allows the screen to retain images drawn to it, eliminating the need for frame-buffer memory. This allows the resolution to be as high as the hardware can handle, which is 1024 by 1024 logically (i.e. DAC resolution) but limited by the physical layout of the screen to 1024 by 780. It also allows the machine to dedicate all of its memory to the programs running on it (as opposed to partitioning off a section for the buffer), an important consideration at the time when memory was expensive and scarce.

Released in 1978, the 4952 came with a full 32 kB of RAM for $9,795 ($46,100 in 2023 dollars) and could be expanded to 64 kB for another $1,995 (2023: $9,400) for a total cost of $11,790 (2023: $55,500).

The 4054 is a version of the 4052 built around the 19" screen from the 4014 terminal rather than the 11" screen from the 4012, increasing display resolution to 4,096 by 3,072. The 4052 and 4054 can display a limited amount of refreshed graphics. This is done by lowering the beam current of the writing gun so it does not trigger the threshold for stored display. The 4054 also had an Option 30 to display an extensive amount of refreshed graphics that used a Signetics 8X300, an early RISC-like microprocessor. There was also an Option 31 CRT with a special multi-layer phosphor to display the refreshed graphics in orange, against the stored graphics in green. The Option 30 was originally what was known at Tek as a "G-job", an unofficial project by Steve Rintala, which was eventually approved by management.

In early 1980s, Tektronix introduced the 4052A and 4054A facelift models, changing from ROMs with patch ROMs to EPROMs for the firmware, and replacing the discrete GPIB software implementation with a TMS9914 GPIB controller for higher GPIB performance.

Architecture

Unlike the 4051, which is based on an 8-bit Motorola 6800 CPU, the 4052 CPU is based on four Am2901 4-bit bit-slice processors used together to make a single 16-bit processor. The processor is microcoded to emulate a 6800 so it can run the 4051 firmware, written in 6800 assembler, with minimal changes. The original goal of the project was to run 8 times faster than the 4051. This was to be achieved by three "factors of 2": First, the processor clock is 2 MHz, compared to the 1 MHz of the 4051 (the 2 MHz was set by the speed of the EPROMs initially used to hold the microcode). Second, the memory is 16 bits wide instead of 8, so two bytes can be accessed in a cycle, theoretically doubling the memory access speed. Finally, the data and code address spaces are separate (Harvard architecture) so program fetch of the next instruction can in principle be overlapped with processing data from the previous instruction.

However, the 4051 firmware was written for the 8-bit 6800 processor so the 16-bit memory access is rarely of any benefit. The overlapping of instruction and data fetch was complicated to implement and was abandoned for the first version of the product. The result was a system with between 2 and 3 times the performance of the 4051.

Early in the project, it was proposed that the 6800-assembler-coded implementation of 48-bit floating-point arithmetic used in the 4051 firmware be implemented in microcode. However, Tek management vetoed the idea until it became obvious that the performance goals would not be met without it. So, late in the project, the floating-point operations were implemented in microcode by adding new opcodes in gaps in the 6800 opcode map, and the firmware was rewritten to use the new opcodes instead of calling the floating-point subroutines. The result was about a 30-times improvement in speed over the 4051. This was because graphics operations are floating-point intensive − every move or draw requires two multiplies and two adds to convert from the user's coordinate space to screen coordinates. Other numeric-intensive operations such as matrix calculations benefited as well.

See Also

• 4050E01 ROM extender
• 4907 "File Manager" floppy disk drive (GPIB)
• 4924 Cartridge tape drive (GPIB)
• 4052F10 RS 232 Printer interface ROM cartridge
• 020-0614-00 Tape enhancement ROM cartridge

Links

• 4052 @ tekmuseum.com
• Tektronix 4050 series at Wikipedia
• Bob Rosenbloom's Tektronix 4052A at the 2017 Vintage Computer Festival (CuriousMarc @ YouTube)
• Tektronix 4054A images rendered (flashing images warning!) (Use under CCA Stepleton @ YouTube)
• Tektronix 4054A Option 30 Games (Use under CCA Stepleton @ YouTube)
• The 4052 system
• Some in-depth demos from Monty McGraw @ YouTube

Documents Referencing 4052

Document	Class	Title	Authors	Year	Links
Tekscope 1979 V11 N3.pdf	Article	Merging High Performance Alphanumerics and Graphics with Fast Computation	Dave Barnard	1979	4052
AX-4425.pdf	Application Note	WP1310 Signal Processing System		1980	7854 • 4052 • WP1310
Tektronix 4909 Hard Disk System Tekniques V5 N4.pdf	Article	4050 Users Share Data Storage and Retrieval in New Tektronix Hard Disk	Chuck Smith • Dave Watts	1981	4909 • 4050 series • 4051 • 4052
Tekscope 1981 V13 N2.pdf	Article	Software Innovations Increase Productivity of Desktop Computer Users	Bruce Rodgers	1981	4051 • 4052 • 4054 • PLOT50
Tekniques vol.6 no.1.pdf	Article	4050 Controls New Generation of Programmable Instruments for Measurement Automation		1982	4051 • 4052 • TM5000 system • TM5003 • TM5006 • DM5010 • DC5009 • DC5010 • FG5010 • PS5010 • SI5010 • MI5010 • MX5010
Tekniques vol.6 no.1.pdf	Article	4052 Helps Interpret Seismic Waveforms	Patricia Kelley	1982	4052
Tekniques vol.6 no.1.pdf	Article	4052 GPIB Programming Guide Now Available	Dale Aufrecht	1982	4052 • GPIB

Documents Referencing 4054

Document	Class	Title	Authors	Year	Links
Tekscope 1981 V13 N2.pdf	Article	Software Innovations Increase Productivity of Desktop Computer Users	Bruce Rodgers	1981	4051 • 4052 • 4054 • PLOT50

Software

• Tektronix 4051/4052/4054 Program Files (GitHub repository)
• Category:4050-series_computers#Links

Miscellaneous

• Tek 4052 aboard a US Navy SSBN submarine

Components

Some Parts Used in the 4052

Part	Part Number(s)	Class	Description	Used in
155-0152-01	155-0152-01	Monolithic integrated circuit	geometry and focus correction	4006 • 4014 • 4052 • 4052A • 4054 • 4054A
155-0154-00	155-0154-00	Monolithic integrated circuit	display multiplexer	4006 • 4052 • 4052A • 4054 • 4054A
Am2901		Monolithic integrated circuit	4-bit CPU slice	4052 • 7912AD
Motorola 6821	156-0427-03 • 156-1205-00	Monolithic integrated circuit	"Peripheral Interface Adapter (PIA)"	067-1137-99 • 4052 • 4052A • 4054 • 4054A • Keithley 191 • 7250 • 7A16P • 7A29P • 7B90P • CG551AP • CG5001 • CG5010 • CG5011
Signetics 82S107		Monolithic integrated circuit	field-programmable logic array	4052 • 7854 • FG5010