RG501

Manuals – Specifications – Links – Pictures

The Tektronix RG501 is a ramp generator plug-in for the TM500 system.

It produces a linear ramp signal adjustable up to 10 V amplitude, positive or negative, with a duration from 10 μs to 10 s (equivalent to 1 μs/Div to 1 s/Div on a typical oscilloscope's X scale). Additionally, the RG501 provides a 3 V (TTL compatible) gate signal (high while ramp running).

The ramp can be triggered from an external input, an internal trigger signal (via the backplane), the line frequency, or can be free-running (Auto Trig mode).

A typical application of the RG501 is to sweep a voltage-controlled function generator's frequency, e.g. when used with with the FG501.

Key Specifications

Ramp duration	Fixed, 10 μs to 1 s in decade steps, variable multiplier ×1 to (min.) ×10 (i.e. max. 10 s)
Amplitude	variable from ~50 mV to 10 V, selectable polarity
Trigger	Sensitivity 200 mVp-p, Level ±1 V, input impedance 10 kΩ
Gate output	3 V, 160 Ω source impedance

Links

• RG501 @ barrytech.com

Rear Interface

Connector Pin	Signal
28A	Ramp output (common on 27A)
25A	Gate output (common on 26A)
24B	Internal trigger input (common on 25B)
22B	Auxiliary ground

Internals

The RG501 uses Tek custom ICs 155-0056-00 (sweep control) and 155-0042-03 (Miller integrator).

Service Notes

If Line Trigger is OK but the power supplies load down in other trigger modes, suspect Q15 is installed incorrectly because of different case styles.

Prices

Year	1975
Catalog Price	$175
In 2023 Dollars	$1,000

Pictures

• 
• 
• 
• 
• 
•