SG505: Difference between revisions

Latest revision as of 05:32, 6 October 2024

Tektronix SG505
ultra-low distortion oscillator Tektronix SG505 Produced from 1980 to 1993 Manuals Tektronix SG505 Option 01 Manual Tektronix SG505 Option 02 Manual Tektronix SG 505 Engineering Instrument Specification (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix SG505 is an ultra-low distortion oscillator plug-in for the TM500 system.

Option 01 adds an intermodulation test signal function.
Option 02 adds a fully balanced output to +28 dBm and selectable source impedance with corresponding changes to the front panel connections. It also includes Option 01.

The SG505 was designed by Bruce Hofer.

Key Specifications

Frequency range	10 Hz to 100 kHz nom. (typ. 9 Hz to 110 kHz) in four overlapping ranges
Frequency accuracy	3% of dial reading
Output level	+10 dB_m to −60 dB_m into 600 Ω in eight 10 dB steps, plus variable control +2.2 dB to −10 dB from calibrated position
Output impedance	600 Ω
Distortion	< 0.0008% (−102 dB) from 20 Hz to 20 kHz
Sync output	200 mV_RMS sine to 20 kHz, at least 120 mV @ 100 kHz; 1 kΩ source impedance
Opt. 1 Intermododulation Signal	Regular output signal superimposed with 60 Hz or 250 Hz low frequency signal with 4:1 amplitude ratio.

Links

Documents Referencing SG505

Document	Class	Title	Authors	Year	Links
Tekscope 1980 V12 N1.pdf	Article	New Products		1980	308 • SG505 • 8002A
Tekscope 1980 V12 N2.pdf	Article	New Products		1980	7854 • 468 • AA501 • SG505 • CG551AP • 1900 • 7612D
Tekscope 1980 V12 N3.pdf	Article	Automatic Distortion Analyzer Speeds Distortion Measurements	Bruce Hofer	1980	AA501 • SG505
070-2088-04.pdf	Book	TM500 Series Rear Interface Data Book		1985	AA501 • AF501 • AM501 • AM502 • AM503 • AM511 • DC501 • DC502 • DC503 • DC503A • DC504 • DC505 • DC505A • DC508 • DC508A • DC509 • DC510 • DC5009 • DC5010 • DD501 • DL502 • DM501 • DM501A • DM502 • DM502A • DM505 • DM5010 • FG501 • FG501A • FG502 • FG503 • FG504 • FG507 • FG5010 • LA501 • LA501W • WR501 • MR501 • PG501 • PG502 • PG505 • PG506 • PG507 • PG508 • PS501 • PS502 • PS503 • PS503A • PS505 • PS5010 • RG501 • SC501 • SC502 • SC503 • SC504 • SG502 • SG503 • SG504 • SG505 • SW503 • TG501 • TR501 • TR502 • MI5010 • MX5010 • SI5010

Internals

The SG505 uses a state-variable oscillator topology employing NE5534 opamps and an N-FET (151-1021-00) based AGC. Range switches change capacitors and AGC time constants, the main dial changes the integrator resistor.

It's internally an surprisingly unremarkable device, no special tricks or selected parts (except for the AGC FET, which is probably some COTS FET selected for threshold voltage and distortion), just an ordinary SVO, some NE553x, standard attenuator and that's it.

Prices

Year	1980
Catalog Price	$600
In 2023 Dollars	$2,200

Pictures

Front Panel
Front Panel
Right Side Internal
Left Side Internal
PCB Right Side
PCB Left Side
PCB Left Side Detail
Option 2 3/4 View
Option 2 Front Panel
Option 2 Left Internal
Option 2 Right Internal

@@ Line 1: / Line 1: @@
-{{TM500 | mfg=Tektronix | type=SG505 | function=ultra-low distortion oscillator | class=signal generator | image=USA Tektronix SG505 Front0.jpg | introduced=1980 | discontinued=1993 |
+{{TM500
-manuals=
+|mfg=Tektronix
-* [http://exodus.poly.edu/~kurt/manuals/manuals/Tektronix/TEK%20SG%20505%20Instruction.pdf Tektronix SG 505 Manual (PDF)]
+|type=SG505
-* [[Media:Tek sc505 eis no ocr.pdf|Tektronix SG 505 Engineering Instrument Specification (PDF)]]
+|class=signal generator
+|function=ultra-low distortion oscillator
+|an=an
+|image=USA Tektronix SG505 Front0.jpg
+|introduced=1980
+|discontinued=1993
+|designers=Bruce Hofer
+|manuals=
+* [[Media:070-2823-00.pdf|Tektronix SG505 Option 01 Manual]]
+* [[Media:070-4359-00.pdf|Tektronix SG505 Option 02 Manual]]
+* [[Media:Tek sc505 eis no ocr.pdf|Tektronix SG 505 Engineering Instrument Specification]]
 }}
+Option 01 adds an intermodulation test signal function.<br>
+Option 02 adds a fully balanced output to +28 dBm and selectable source impedance with corresponding changes to the front panel connections. It also includes Option 01.
+The SG505 was designed by [[Bruce Hofer]].
 {{BeginSpecs}}
 {{Spec | Frequency range | 10 Hz to 100 kHz nom. (typ. 9 Hz to 110 kHz) in four overlapping ranges }}
-{{Spec | Frequency accuracy | 3% of dial reading }}
+{{Spec | Frequency accuracy | 3% of dial reading }}
-{{Spec | Output level | +10 dB<sub>m</sub> to -60 dB<sub>m</sub> into 600 Ω in eight 10 dB steps, plus variable control +2.2 dB to -10 dB from calibrated position }}
+{{Spec | Output level | +10 dB<sub>m</sub> to −60 dB<sub>m</sub> into 600 Ω in eight 10 dB steps, plus variable control +2.2 dB to −10 dB from calibrated position }}
 {{Spec | Output impedance | 600 Ω }}
-{{Spec | Distortion | < 0.0008% (-102 dB) from 20 Hz to 20 kHz }}
+{{Spec | Distortion | < 0.0008% (−102 dB) from 20 Hz to 20 kHz }}
 {{Spec | Sync output | 200 mV<sub>RMS</sub> sine to 20 kHz, at least 120 mV @ 100 kHz; 1 kΩ source impedance }}
-{{Spec | Topology | State-variable oscillator with N-FET (151-1021-00) based AGC. Range switches change capacitors and AGC time constants, main dial changes integrator resistor. Oscillator built from NE5534 amplifiers. }}
+{{Spec | Opt. 1 Intermododulation Signal | Regular output signal superimposed with 60 Hz or 250 Hz low frequency signal with 4:1 amplitude ratio.}}
 {{EndSpecs}}
-<!-- It's internally an surprisingly unremarkable device, no special tricks or selected parts (except for the AGC FET, which is probably some COTS FET selected for threshold voltage and distortion) or something like that, just an ordinary SVO, some NE553x, standard attenuator and that's it - no magic :-) -->
+==Links==
+{{Documents|Link=SG505}}
+{{PatentLinks|SG505}}
+==Internals==
+The SG505 uses a state-variable oscillator topology employing NE5534 opamps and an N-FET (151-1021-00) based AGC. Range switches change capacitors and AGC time constants, the main dial changes the integrator resistor.
+It's internally an surprisingly unremarkable device, no special tricks or selected parts (except for the AGC FET, which is probably some COTS FET selected for threshold voltage and distortion), just an ordinary SVO, some NE553x, standard attenuator and that's it.
+==See Also==
+* [[F7523A1]]
+* [https://www.youtube.com/watch?v=c2uHdtpm1mA Zenwizard Studios - TekTronix SG505 Repair and Abridged Validation]
+* [https://www.youtube.com/watch?v=3uB28MuskGw Zenwizard Studios - FINALLY Measuring the Distortion of an SG505!]
+* [https://www.youtube.com/watch?v=QgIAB0WrqnY Zenwizard Studios - SG505 Op1 Restoration and Distortion Measurements]
+==Prices==
+{| class="wikitable sortable"
+|-
+! Year
+! 1980
+|-
+! Catalog Price
+| align="right" | $600
+|-
+! In 2023 Dollars
+| align="right" | $2,200
+|}
 ==Pictures==
 <gallery>
-File:USA Tektronix SG505 Front0.jpg
+USA Tektronix SG505 Front0.jpg|Front Panel
-File:USA_Tektronix_SG505_LayoutSide.jpg
+Tek sg505 front.jpg|Front Panel
-File:USA_Tektronix_SG505_CompSide.jpg
+SG505_Right_Internal.jpg|Right Side Internal
-File:USA_Tektronix_SG505_CompSideB.jpg
+SG505_Left_Internal.jpg|Left Side Internal
-Tek sg505 front.jpg
+USA_Tektronix_SG505_LayoutSide.jpg|PCB Right Side
+USA_Tektronix_SG505_CompSide.jpg|PCB Left Side
+USA_Tektronix_SG505_CompSideB.jpg|PCB Left Side Detail
+SG505_Option2_3-4_View.jpg|Option 2 3/4 View
+SG505_Option2_Front_Panel.jpg|Option 2 Front Panel
+SG505_Option2_Left_Internal.jpg|Option 2 Left Internal
+SG505_Option2_Right_Internal.jpg|Option 2 Right Internal
 </gallery>