7CT1N

Manuals – Specifications – Links – Pictures

The Tektronix 7CT1N is a curve tracer plug-in for 7000-series scopes. The 5CT1N plug-in for 5000-series scopes is very similar.

It can be installed in either a vertical or a horizontal compartment, a front-panel switch must be set accordingly. A pull-out cable with a plastic BNC plug connects to the input of a module installed in the corresponding plugin for the other axis, with a fixed 100 mV/div scaling compatible with time base X inputs.

Internally, a variable-amplitude 55 Hz triangle-wave source supplies a transformer to step up the drive voltage and decouple it from ground (Emitter terminal). A step source supplies base current or gate voltage to the DUT.

The amplifier for the current axis can be switched into a ÷1000 mode to detect leakage currents (of typical 1970s semiconductors, anyway).

Key Specifications

DUT drive voltage (C-E)	positive (NPN or N-channel) or negative (PNP or P-channel) half-waves 7.5 V, 0.5 V/div, 240 mA peak 30 V, 2 V/div, 60 mA peak 75 V, 5 V/div, 24 mA peak 300 V, 20 V/div, 6 mA peak HV warning light on for > 50 V peak power 500 mW
DUT current display	10 μA/div to 20 mA/div, 1−2−5 steps (×1 mode) 10 nA/div to 20 μA/div, 1−2−5 steps (÷1000 mode)
Base/Gate drive	0 to at least 10 steps dual polarity variable offset, at least +/− 5 steps current mode: 1 μA/step to 1 mA/step in 1−2−5 sequence voltage mode: 1 mV/step to 1 V/step in 1−2−5 sequence (via 1 kΩ current limiting resistor)
DUT connection	Three 4 mm jacks / binding posts
DUT adapters	013-0072-00 Axial diodes 013-0069-00 Devices with long leads 013-0070-01 Transistors in TO-3 or TO-66 cases 013-0074-00 Transistors with stud leads 013-0110-00 Diodes with stud leads 013-0112-00 Transistors in TO-36 cases 013-0128-00 Transistors in TO-5 or TO-18

Links

• Tek 7CT1N @ amplifier.cd
• A homebrew test adapter
• Dennis Tillman: An Inexpensive Vacuum Tube Curve Tracer Adapter for All Tektronix Semiconductor Curve Tracers
• Tek 7CT1N @ barrytech.com

Documents Referencing Curve tracers

Document	Class	Title	Authors	Year	Links
062-1009-00.pdf	Book	Measurement Concepts: Semiconductor Device Measurements	John Mulvey	1969	Curve tracers • Tunnel diodes
Tekscope 1969 V1 N1 Feb 1969.pdf	Article	Curve Tracing Displays		1969	Curve tracers • 576
Tekscope 1969 V1 N5 Oct 1969.pdf	Article	Troubleshooting the Sweep Ciruits	Charles Phillips	1969	575 • 576 • Curve tracers
Tekscope 1972 V4 N3 May 1972.pdf	Article	Semiautomatic Testing with the Curve Tracer	Jack Millay	1972	576 • 172 • Curve tracers
Tektronix Curve Tracers - Device Testing Techniques.pdf	Book	Tektronix Curve Tracers - Device Testing Techniques		1985	Curve tracers • Tunnel diodes

Common Problems

See 7CT1N/Repairs.

Prices

Year	1971	1980	1990
Catalog Price	$400	$1,000	$2,100
In 2023 Dollars	$3,000	$3,600	$4,900

Pictures

• 

  7CT1N front

• 

  7CT1N left side (1979 date codes)

• 

  7CT1N right side

• 

  7CT1N LHS (1984 date codes)

• 

  7CT1N RHS '84

• 
• 

Measurements

• 

  home-made A/B adapter

• 

  home-made A/B adapter, rear

• 

  home-made A/B adapter used to compare two transistors

• 

  Another home-made adapter (see this thread)

• 

  7CT1N tracing a no-name optocoupler

• 

  7CT1N tracing a BC337 NPN Si transistor

• 
• 

  10 mA tunnel diode. 7A13 is set to 10 mV/div for ×10 horizontal expansion.