3T77
The Tektronix 3T77 is a sampling sweep plug-in for 560-series scopes. It was introduced in 1962, along with the 567 and 3S76.
Bob Webb and maybe Jim Geddes and possibly Cliff Moulton designed the Type 77, which evolved into the 3T77.
It triggers on either the internal trigger pick-off from the vertical plug-in or from an external trigger signal input. Triggering is faster and more sensitive with an external input.
The 3T77 can operate in any of four modes: external sweep, manual sweep, normal, or single sweep. In external sweep mode, an external control voltage is applied to a BNC connector on the front panel of the 3T77. This voltage determines the X-position of the spot on the CRT and, correspondingly, the delay from the trigger event to the sampling point. Manual mode is the same as external sweep mode, but the control voltage is generated internally based on the position of a potentiometer on the front panel of the 3T77. In normal mode, an internal ramp generator produces the control voltage, repeatedly redrawing the trace on the CRT. In single sweep mode, the internal ramp generator is started by a button on the front panel, makes one horizontal trace, and then waits for the button to be pressed again.
Internals
While still tube-based, the 3T77 uses 2N976 transistors and 1N3129 tunnel diodes. It uses a 6688 tube in the staircase generator circuit, and an RCA 7586 nuvistor as a ramp-current generator. The 3T77 mixes "classic" chassis/ceramic strip construction with the trigger circuit built on a PCB.
Difference of 3T77 and 3T77A
TIME POSITION knob instead DELAY knob, with more range of delay by slow sweep rate.
RECOVERY TIME knob can be pulled for HF-sync.
Specifications
please add
Pictures
3T77 Photos
-
3T77 front
-
3T77
-
3T77
-
3T77
-
3T77
-
3T77
-
3T77
-
3T77
-
3T77
-
3T77
3T77 Schematics
-
Trigger schematic
-
Block Diagram
-
Connector and Power Supply
-
Horizontal Amp Schematic
-
Staircase Schematic
-
Fast Ramp Schematic
3T77A Photos
-
3T77A Front
-
3T77A Left
-
3T77A Right
-
3T77A Trigger Board
-
3T77A Trigger Board
-
3T77A Top
-
3T77A Rear
Some Parts Used in the 3T77
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 1N3128 | 152-0074-00 • 152-074 | Discrete component | 5 mA, 15 pF germanium tunnel diode | 3T77 • 5T1 |
| 1N3129 | 152-0043-00 | Discrete component | 20 mA Germanium tunnel diode | 3T77 • 5T1 |
| 6688 | 154-0215-00 | Vacuum Tube (Pentode) | miniature high-slope VHF/UHF pentode | P80 • 3T77 • 3T77A • 4S2A • 526 • TR-4602 |
| 6DJ8 | 154-0187-00 • 154-0305-00 | Vacuum Tube (Dual Triode) | dual triode | 067-506 • 111 • 132 • 161 • 310A • 316 • 317 • 502 • 502A • 503 • 504 • 506 • 515 • 516 • 519 • 526 • 529 • RM529 • 533 • 535 • 536 • 543 • 544 • 545 • 545A • 545B • 546 • 547 • 549 • 555 • 556 • 561A • 561S • 564 • 565 • 567 • 581 • 581A • 585 • 585A • 661 • 1A4 • 1S1 • 60 • 2A60 • 63 • 2A63 • 67 • 2B67 • 3A1 • 3A1S • 3A2 • 3A3 • 3A6 • 3A7 • 72 • 3A72 • 75 • 3A75 • 4S2 • 51 • 3B1 • 3B1S • 3B2 • 3B3 • 3B4 • 3M1 • 3S76 • 3T77 • 3T77A • 9A1 • 9A2 • 1121 • 80 • 81 • 82 • 86 • B • O • W • Z • Telequipment D56 • Telequipment S32A • Telequipment D52 • S-311 • Telequipment TD51 • Telequipment S52 • Telequipment S51 • Telequipment Type A • TU-4 |
| 6EW6 | 154-0212-00 | Vacuum Tube (Pentode) | pentode | 106 • 132 • 360 • 51 • 527 • 581 • 581A • 585 • 585A • 3T77 • 3T77A |
| 7586 | 154-0306-00 | Vacuum Tube (Triode) | Nuvistor triode | M • 1A1 • 1A2 • 1A5 • 10A2 • 10A2A • 11B1 • 11B2A • 321 • 321A • 3A1 • 3A1S • 3A3 • 3A5 • 3A6 • 3A7 • 3A8 • 3A74 • 3S76 • 3T77 • 3T77A • 3B5 • 4S1 • 4S2 • 6R1 • 6R1A • 9A1 • 9A2 • 82 • 86 • S-311 |
| RT5204 | 151-0058-00 | Discrete component | Silicon NPN transistor | 565 • RM565 • Z • 2A61 • 3B1 • 3B3 • 3S76 • 3T77 |