7000-series plug-ins

The Tektronix 7000 series includes the following plug-ins:

Vertical plug-ins

• 7A11 — 150/250 MHz single channel with stored FET probe
• 7A12 — 100 MHz dual channel
• 7A13 — 100 MHz "differential comparator"
• 7A14 — 120 MHz current probe amplifier (for P6021, P6022)
• 7A15 — 80 MHz low cost single channel
• 7A16 — 225 MHz, 1 MΩ single channel
• 7A16P — 200 MHz, 1 MΩ/50 Ω programmable (for 7912AD or 7612D)
• 7A17 — 150 MHz, 50 Ω single channel, customizable
• 7A18 — 75 MHz, 1 MΩ dual channel
• 7A19 — 500 MHz, 50 Ω single channel
• 7A21 — "direct access"
• 7A22 — 1 MHz, 1 MΩ differential
• 7A24 — 400 MHz, 50 Ω dual channel
• 7A26 — 200 MHz, 1 MΩ dual channel
• 7A29 — 1 GHz, 50 Ω single channel
• 7A42 — 350 MHz, quad channel logic triggered
• 7F10 — 750/1000 MHz optical input
• 7M11 — dual passive delay line
• 7S11 — sampling plug-in

Horizontal plug-ins

• 7B10 — 1 GHz
• 7B15 — 1 GHz, delaying
• 7B50 — 100 MHz
• 7B51 — 100 MHz, delaying
• 7B52 — 100 MHz dual
• 7B53 — 100 MHz dual
• 7B70 — 200 MHz, no delay
• 7B71 — 200 MHz, delaying
• 7B80 — 400 MHz
• 7B85 — 400 MHz, delaying
• 7B87 — 400 MHz, with pre-trigger
• 7B90 — for digitizers e.g. 7912
• 7B92 — 500 MHz, dual
• 7T11 — Sampling Sweep Unit

Combined vertical and horizontal plug-ins

• 7D20 — programmable digitizer
• 7S12 — TDR/sampler
• 7S14 — 350 ps dual channel sampler
• 7L5 — 5 MHz Spectrum Analyzer
• 7L12 — 1.8 GHz Spectrum Analyzer

Special Purpose

• 7CT1N — Curve Tracer
• 7D01 — Logic Analyzer
• 7D11 — Digital Delay
• 7D12 — A/D Converter
• 7D13 — Digital Multimeter
• 7D14 — 525 MHz counter
• 7D15 — 225 MHz counter
• DF1 — Display Formatter
• DF2 — Display Formatter with GPIB

These plug-ins are used with 7000-series scopes.