7000-series plug-ins

From TekWiki
Revision as of 11:41, 5 May 2014 by Peter (talk | contribs) (sub-models moved under main model)
Jump to navigation Jump to search

The Tektronix 7000 series includes the following plug-ins:

Vertical plug-ins

  • 7A11 — 150/250 MHz single channel with stored FET probe (1969)
  • 7A12 — 100 MHz dual channel (1969)
  • 7A13 — 100 MHz "differential comparator"
  • 7A14 — 120 MHz current probe amplifier (for P6021, P6022) (1969)
  • 7A15 — 80 MHz low cost single channel
    • 7A15A
    • 7A15N — 7A15 without readout
    • 7A15AN — 7A15A without readout
  • 7A16 — 225 MHz, 1 MΩ single channel
  • 7A16P — 200 MHz, 1 MΩ/50 Ω programmable (for 7912AD or 7612D only)
  • 7A17 — 150 MHz, 50 Ω single channel, customizable (1973)
  • 7A18 — 75 MHz, 1 MΩ dual channel
    • 7A18N — 7A18 without readout
  • 7A19 — 500 MHz, 50 Ω single channel (1973–2000)
  • 7A21N — "direct CRT access"
  • 7A22 — 1 MHz, 1 MΩ differential
  • 7A24 — 400 MHz, 50 Ω dual channel
  • 7A26 — 200 MHz, 1 MΩ dual channel
  • 7A29 — 1 GHz, 50 Ω single channel
  • 7A29P — programmable
  • 7A42 — 350 MHz, quad channel logic triggered
  • 7F10 — 750/1000 MHz optical input
  • 7M11 — dual passive delay line
  • 7S11 — sampling plug-in

Horizontal plug-ins

  • 7B10 — 1 GHz
  • 7B15 — 1 GHz, delaying
  • 7B50 — 100 MHz
  • 7B51 — 100 MHz, delaying
  • 7B52 — 100 MHz dual
  • 7B53 — 100 MHz dual
  • 7B70 — 200 MHz, no delay
  • 7B71 — 200 MHz, delaying
  • 7B80 — 400 MHz
  • 7B85 — 400 MHz, delaying
  • 7B87 — 400 MHz, with pre-trigger
  • 7B90 — for digitizers e.g. 7912
  • 7B92 — 500 MHz, dual
  • 7T11 — Sampling Sweep Unit

Combined vertical and horizontal plug-ins

  • 7D20 — programmable digitizer
  • 7J20 — optical spectrometer
  • 7S12 — TDR/sampler
  • 7S14 — 350 ps dual channel sampler
  • 7L5 — 5 MHz Spectrum Analyzer
  • 7L12 — 1.8 GHz Spectrum Analyzer

Special Purpose

  • 7CT1N — Curve Tracer
  • 7D01 — Logic Analyzer
    • DF1 — Display Formatter, for 7D01
    • DF2 — Display Formatter with GPIB, for 7D01
  • 7D11 — Digital Delay
  • 7D12 — A/D Converter
  • 7D13 — Digital Multimeter
  • 7D14 — 525 MHz counter
  • 7D15 — 225 MHz counter


These plug-ins are used with 7000-series scopes.