7912HB
The Tektronix 7912HB is a scan converter based digitizer in the 7912 series, introduced in 1988. It is an improved version of the previous 7912AD, increasing bandwidth to 750 MHz (using a 7A29P amplifier).
For the 7912AD and 7912HB, special GPIB-controllable plug-in modules with a 'P' (Programmable) suffix were available, e.g. 7A16P, 7A29P and 7B90P.
The 7912AD was succeeded by the 750 MHz 7912HB in 1987 (using a 7A29P amplifier).
Key Specifications
- please add
Options
- Option 4: Change to fast digitize mode. This option trades off scan time with resolution by compressing the scan. The target is written on and read from a 256 x 256 point matrix with a maximum of 14 points stored per vertical scan. This option is achieved by setting the correct jumpers on the A16, A20, A22, A26, A46 boards.
- Option 13: Changes the video output to 625 lines/frame with a 50 Hz field rate (PAL). This option is achieved by setting the correct jumpers on the A20 and A28 boards.
Internals
Three output methods are provided: Video (NTSC or PAL), X-Y-Z low-speed analog, and a GPIB interface. For video-out, Tektronix recommended the 634 monitor or a monitor from the 650- and 670-series and a 75 Ω termination. For X-Y-Z analog, Tek recommended a 600-series monitor and no specific termination requirement.
Links
Documents Referencing 7912HB
| Document | Class | Title | Authors | Year | Links |
|---|---|---|---|---|---|
| SAND94-0784.pdf | Article | Overview of the Instrument Control and Data Reduction Software in the Sandia Data Acquistion System at the Nevada Test Site | William B. Boyer | 1994 | 7912HB • RTD720 • 7103 |
See Also
- R7912, 7912AD
- WP2051, WP2052
- MP1101
- SCD1000, SCD5000
- 670-6466-00 7912 AD plug-in interface extender
- 067-0854-00 Calibration Kit
- 067-0679-99 R7912 Demo Unit
Pictures
-
7912HB
-
7912HB
-
7912HB
-
7912HB
