475: Difference between revisions
No edit summary |
(designers - see Tekscope Vol. 4 No. 5, Sep 1972) |
||
| Line 11: | Line 11: | ||
|manuals= | |manuals= | ||
'''475''' | '''475''' | ||
* [ | * [[Media:070-1333-00.pdf|Tektronix 475 Operators Manual]] (PDF, OCR, 14MB, good quality) | ||
* [ | * [[Media:070-1332-00.pdf|Tektronix 475 Service Manual]] (PDF, 65MB, OK quality, needs re-OCR) | ||
* [[Media: | * [[Media:475_DM44_op.pdf|Tektronix 475/DM44 Operators Manual]] (PDF, 16MB) | ||
* [ | * [http://w140.com/tek_475_tek.pdf Tektronix 475 Service Manual] (PDF, 65MB, OK quality) | ||
* [ | * [http://w140.com/Tektronix_475_Oscilloscope_Service_Manual.pdf Tektronix 475 Service Manual] (PDF, 108MB, good quality) | ||
* [[Media: | * [[Media:TB-9-6625-2240-35.pdf|475 calibration (Army)]] (PDF, OCR) | ||
'''475A''' | '''475A''' | ||
* [[Media:070-2163-00.pdf|Tektronix 475A-DM44 Oscilloscope Instruction Manual (OCR | * [[Media:070-2163-00.pdf|Tektronix 475A-DM44 Oscilloscope Instruction Manual]] (PDF, OCR) | ||
* [[Media:070-2162-00.pdf|Tektronix 475A Service Manual (11MB | * [[Media:070-2162-00.pdf|Tektronix 475A Service Manual]] (PDF, 11MB) | ||
* [[Media:tek_475a_block_diagram.pdf|Tektronix 475A Schematics (PDF, | * [[Media:tek_475a_block_diagram.pdf|Tektronix 475A Schematics]] (PDF, needs re-OCR) | ||
* [http://w140.com/tek_475a_schematics.pdf Tektronix 475A Schematics (PDF) | * [http://w140.com/tek_475a_schematics.pdf Tektronix 475A Schematics] (PDF) | ||
'''Modifications''' | '''Modifications''' | ||
* [[Media:050-1558-00.pdf|Modification: U3165 Replacement]] | * [[Media:050-1558-00.pdf|Modification: U3165 Replacement]] | ||
* [[Media:062-2784-00.pdf|067-0676-00 Vertical Insertion Unit for 475 Datasheet (PDF, needs OCR) | * [[Media:062-2784-00.pdf|067-0676-00 Vertical Insertion Unit for 475 Datasheet]] (PDF, needs OCR) | ||
'''History''' | '''History''' | ||
* [[Media:Tek 465 and 475 marketing sales release.pdf|Tektronix 465 and 475 Marketing Sales Release (PDF) | * [[Media:Tek 465 and 475 marketing sales release.pdf|Tektronix 465 and 475 Marketing Sales Release]] (PDF) | ||
* [[Media:tek_475a_msr.pdf|Tektronix 475A Marketing Sales Release (PDF, | * [[Media:tek_475a_msr.pdf|Tektronix 475A Marketing Sales Release]] (PDF, needs re-OCR) | ||
}} | }} | ||
The '''Tektronix 475''' is a portable dual-trace oscilloscope with dual time-bases similar to the [[465]], | The '''Tektronix 475''' is a portable dual-trace oscilloscope with dual time-bases similar to the [[465]], | ||
| Line 59: | Line 57: | ||
{{Spec | Calibrator | 1 kHz, 30 mA / 300 mV square wave }} | {{Spec | Calibrator | 1 kHz, 30 mA / 300 mV square wave }} | ||
{{Spec | Outputs | CH2 Vert Signal Out, 20 mV/Div into 1 MΩ or 10 mV/Div into 50 Ω; A and B +GATE OUT, +5 V; [[LEMO S-series connector|Probe power jack]] }} | {{Spec | Outputs | CH2 Vert Signal Out, 20 mV/Div into 1 MΩ or 10 mV/Div into 50 Ω; A and B +GATE OUT, +5 V; [[LEMO S-series connector|Probe power jack]] }} | ||
{{Spec | CRT | 8 × 10 cm², P31 phosphor (P11 opt.) }} | {{Spec | CRT | 8 × 10 cm², P31 phosphor (P11 opt.), [[154-0677-00]] }} | ||
{{Spec | Power | 110, 115, 120, 220, 230 or 240 V<sub>AC</sub> ±10%, 48-440 Hz, max. 100 W }} | {{Spec | Power | 110, 115, 120, 220, 230 or 240 V<sub>AC</sub> ±10%, 48-440 Hz, max. 100 W }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
Revision as of 00:30, 14 October 2021
The Tektronix 475 is a portable dual-trace oscilloscope with dual time-bases similar to the 465, but with 200 MHz bandwidth and a maximum vertical sensitivity of 2 mV/Div. It is all solid-state except for the CRT. It was introduced in November 1972.
The military variant is called OS-261 C(v)1/0, which has a DC/DC converter (12/24V input) on board.
A revised version, the 475A (introduced in 1977), has 250 MHz bandwidth and a maximum vertical sensitivity of 5 mV/Div.
The 1106 is a battery pack for the 475.
The optional DM44 multimeter attaches to the top of the instrument.
Key Specifications
| Bandwidth | 200 MHz (475), AC cutoff 10 Hz, switchable BW limit 20 MHz |
|---|---|
| Rise time | 1.75 ns (475) |
| Deflection | 2 mV/Div to 5 V/Div, 1-2-5 |
| Cascaded mode | 400 μV/Div, 50 MHz with CH1 input connected to CH2 VERT SIG OUT |
| Time base | 10 ns/Div to 500 ms/Div, 1-2-5, and ×10 magnifier |
| Input impedance | 1 MΩ // 20 pF |
| Triggering | 0.3 Div (int) or 50 mV (ext) to 40 MHz, increasing to 1.5 Div/250 mV at 200 MHz; AC coupling >60 Hz; LF REJ >50 kHz, HF REJ <50 kHz |
| X bandwidth | 3 MHz |
| Z axis input | 5 Vp-p, 50 MHz |
| Calibrator | 1 kHz, 30 mA / 300 mV square wave |
| Outputs | CH2 Vert Signal Out, 20 mV/Div into 1 MΩ or 10 mV/Div into 50 Ω; A and B +GATE OUT, +5 V; Probe power jack |
| CRT | 8 × 10 cm², P31 phosphor (P11 opt.), 154-0677-00 |
| Power | 110, 115, 120, 220, 230 or 240 VAC ±10%, 48-440 Hz, max. 100 W |
Internals
The 475 uses a number of Tek-made integrated circuits, including the 155-0032-01 input preamplifier, 155-0085-00 input amplifier, 155-0078-00 vertical amplifier, 155-0091-00 channel switch, 155-0082-00 vertical output amplifier, and 155-0049-00 sweep control.
Links
- Lazy Electrons Tektronix 475A & DM44 Repair Page
- The New Look in Portables, in Tekscope Vol. 4 No. 5, 1972
- Tek 475 / Tek 475A @ amplifier.cd
- Tek 475A in operation @ YouTube
- Handle Replacement Modification Kit
Common Problems
- See 475/Repairs
Pictures
-
Tektronix 475A
-
Tektronix 475A
-
Tek 475 in mixed sweep ("MIX") horizontal mode
-
475A with DM44
-
475
-
475 rear
-
475A with DM44
-
475
-
-
475A rear
-
475 (OS-261 C) rear, with DC-Input
-
475A A9 Interface Board
-
475A A6 & Fan Motor
-
475A Power Supply Section of A9
-
475A with DM44 Board on top
-
475A A3 Vertical Preamp Board
-
475/DM44 measuring a 1 kHz sine wave
-
475/DM44 measuring a 10 kHz sine wave
-
475/DM44 measuring a 100 kHz sine wave
475M
Custom ICs used in the 475