485
The Tektronix 485 is a dual-trace, portable analog oscilloscope with a maximum bandwidth of 350 MHz, introduced in March of 1972. The project leader for the horizontal section of the 485 was Murlan Kaufman.
The impedance of the inputs can be set individually to 50 Ω or 1 MΩ. The scope achieves its maximum bandwidth when the inputs are in 50 Ω mode.
A distinguishing feature – at least in a portable oscilloscope of its period – is the Alternate Horizontal Mode. In this mode, the B timebase is shown in a separate full-width scan, as opposed to the more common Mixed Mode, where the B timebase is shown on the same line as the A timebase, after the delay time.
The 465, which was introduced after the 485, only received this feature in its "B" incarnation (465B).
Variant 485-1 omits the "A EXT Trigger display", as does variant 485-2 which additionally only has 50 Ω inputs.
Key Specifications
| Input Impedance | 50 Ω / 1 MΩ // 20 pF |
|---|---|
| Rise time | 1 ns (50 Ω) / 1.4 ns (1 MΩ) |
| Bandwidth | 350 MHz (50 Ω) / 250 MHz (1 MΩ) |
| Deflection | 5 mV/div to 5 V/div in 1−2−5 sequence, 2% accuracy |
| Time Base | 1 ns/div to 0.5 s/div in 1−2−5 sequence |
| CRT | 154-0652-00 and 154-0652-05, 21 kV acceleration, 8x10 divisions (0.8cm/div) |
| Weight | 21.5 lb/9.3 kg |
| Power | AC 90-136V/180-272V 48-440Hz, 60W @115V |
Links
- Tek 485 @ amplifier.cd
- 485 troubleshooting @ YouTube
Internals
The 485 includes a switching power supply and uses custom integrated circuits for most of the gain blocks. Triggering uses tunnel diodes.
Pictures
External
-
-
-
-
-
-
-
-
-
-
-
Time base A, External trigger display switch
-
Internals
-
Top, Horizontal Amp board
-
Underside, Power supply, A-Trig board
-
LHS, Vertical Amp board
-
RHS, Sweep/Inverter board
-
A-Trigger board
-
Vertical attenuator Assy
-
Vertical attenuator Assy, 50Ω Board
-
Vertical attenuator Assy, Hi-Z Board
