2467
The 2467 and 2467B are the same as the 2465A, except that the 2465A uses a conventional CRT while the 2467 and 2467B use a micro-channel plate CRT that enables bright traces at fast sweep rates, particularly with one-shot or low repetition rate signals.
The 2567BHD variant is identical to the 2467B with the addition of Options 5H and 06 included.
The 2467 is from the penultimate generation of analog Tektronix scopes.
The horizontal amplifier was designed by Art Metz and Ken Schlotzhauer. Art Metz also worked on the triggers. Art Metz and Walt Ainsworth designed the sweeps.
Key Specifications
| Bandwidth | 350 MHz (2467B: 400 MHz) |
|---|---|
| Sweep Rate | 500 ps/div |
| Channels | Four independent channels |
| Vertical | 2 mV/div vertical sensitivity |
| Cursors | Delta Volts and Delta Time Cursors |
| CRT Readout | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators |
| Trigger | 500 MHz min.; Advanced Triggering with "Hands Off" Auto Level Triggering |
| Input Impedance | 50 Ω/1 MΩ inputs with 50 Ω protection |
| Probes | Two or four P6136 ×10 probes, 1.3 m |
ROM Images
- 160-3302-06(ZIP)
- 160-3303-06(ZIP)
Options
- Option 01 - (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
- Option 05 - (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
- Option 05H - High-definition Television (As above but supports HDTV) - 2467B only
- Option 06 - (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
- Option 09 - Add option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
- Option 10 - Add a GPIB interface for remote control.
- Option 11 - Add two probe-power connectors on the rear panel of the instrument. Only shown in the 1987 catalogue.
- Option 1R - Shipped with a 19" rack mount kit fitted.
Standard Accessories
- Operators Manual
- 010-6136-01 - (4x) Probes (10x, 1.3 m) with accessories
- 134-0016-00 - Banana plug/binding post adapter
- 016-0692-00 - Accessory pouch, snap fastener
- 016-0537-00 - Accessory pouch, zip-lock fastener
- 159-0021-00 - Fuse (2 A, 250 V, AGC/3AG)
- 378-0199-00 - Crt filter, blue plastic (installed)
- 378-0208-00 - Crt filter, clear plastic
- 200-3199-00 - Front cover (2467)
- 200-3199-01 - Front cover (2467B)
With Option 01
- 012-0941-01 - Probe set
- 020-0087-00 - Accessories to probe set
- 010-6602-00 - P6602 Temperature probe
With Option 05
- 378-0199-01 - CCIR Graticule
- 378-0199-02 - NTSC Graticule
- 016-0180-00 - Polarized viewing hood
With Option 05H
- 378-0199-01 - CCIR Graticule
- 378-0199-02 - NTSC Graticule
- 016-0180-00 - Polarized viewing hood
- 011-0055-00 - (3x) 75 Ω Terminators
With Option 09
- 010-6407-01 - P6407 word recognizer probe
- 012-0747-00 - (2x) 10-wide comb, 10-inch leads (without grabbers)
- 206-0222-00 - (20x) Grabber tips
Optional Accessories
- Service manual
- 016-0720-00 - Protective cover, waterproof, blue vinyl
- 010-6131-01 - Probe Package P6137 (for use with channels 3 and 4)
- 016-0691-00 - Rackmounting conversion kit
- 016-0096-00 - Rear-support kit (for use with rackmounted instruments)
- 016-0180-00 - Polarized collapsible viewing hood
- 016-0592-00 - Folding viewing hood, light-shielding
- C30B series Oscilloscope camera
- 200C - Scope-mobile cart (2167)
- K212 - Scope-mobile cart (2167B)
- 346-0058-00 - Carrying strap
- 202-0302-00 - Transic case with telescoping handle and retractable wheels
Gerbers
Links
- Tektronix 2467B "Bright Eye (tm)" Oscilloscope – 1992 Tek sales video by vintageTek Museum @ YouTube
- Tektronix 2467B Oscilloscope Restoration by NFM @ YouTube
See also
Pictures
Some Parts Used in the 2467
Some Parts Used in the 2467B
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 155-0242-00 | 155-0242-00 • 155-0242-01 | Hybrid integrated circuit | Z-axis amplifier and autofocus | 2215 • 2252 • 2440 • 2445 • 2445B • 2465 • 2465B • 2467 • 2467B |