7000-series plug-ins
The Tektronix 7000 series plug-ins are used with 7000-series scopes.
They include the following models:
Vertical plug-ins
- 7A11 — 150/250 MHz single channel with stored FET probe (1969)
- 7A12 — 100 MHz dual channel (1969)
- 7A13 — 100 MHz "differential comparator"
- 7A14 — 120 MHz current probe amplifier (for P6021, P6022) (1969)
- 7A15 — 80 MHz low cost single channel
- 7A15A
- 7A15N — 7A15 without readout
- 7A15AN — 7A15A without readout
- 7A16 — 225 MHz, 1 MΩ single channel
- 7A16P — 200 MHz, 1 MΩ/50 Ω programmable (for 7912AD or 7612D only)
- 7A17 — 150 MHz, 50 Ω single channel, customizable (1973)
- 7A18 — 75 MHz, 1 MΩ dual channel
- 7A18N — 7A18 without readout
- 7A19 — 600 MHz, 50 Ω single channel (1973–2000)
- 7A21N — "direct CRT access"
- 7A22 — 1 MHz, 1 MΩ differential
- 7A24 — 400 MHz, 50 Ω dual channel
- 7A26 — 200 MHz, 1 MΩ dual channel
- 7A29 — 1 GHz, 50 Ω single channel
- 7A29P — programmable
- 7A42 — 350 MHz, quad channel logic triggered
- 7F10 — 750/1000 MHz optical input
- 7M11 — dual passive delay line
- 7S11 — sampling plug-in
Horizontal plug-ins
- 7B10 — 1 GHz
- 7B15 — 1 GHz, delaying
- 7B50 — 100 MHz
- 7B51 — 100 MHz, delaying
- 7B52 — 100 MHz dual
- 7B53 — 100 MHz dual
- 7B70 — 200 MHz, no delay
- 7B71 — 200 MHz, delaying
- 7B80 — 400 MHz
- 7B85 — 400 MHz, delaying
- 7B87 — 400 MHz, with pre-trigger
- 7B90 — for digitizers e.g. 7912
- 7B92 — 500 MHz, dual
- 7B92A — 500 MHz, dual
- 7T11 — Sampling Sweep Unit
Combined vertical and horizontal plug-ins
- 7D20 — programmable digitizer
- 7J20 — optical spectrometer
- 7S12 — TDR/sampler
- 7S14 — 350 ps dual channel sampler
- 7L5 — 5 MHz Spectrum Analyzer
- 7L12 — 1.8 GHz Spectrum Analyzer
- 7L13 — Spectrum Analyzer
- 7L14 — Spectrum Analyzer
- 7L18 — 18 (60) GHz Spectrum Analyzer