SG5010: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
The designers of the SG5010 were [[Bruce Hofer]], [[Bob Metzler]], [[Richard Cabot]], and [[Bob Wright]]. | The designers of the SG5010 were [[Bruce Hofer]], [[Bob Metzler]], [[Richard Cabot]], and [[Bob Wright]]. | ||
{{BeginSpecs}} | |||
{{Spec | Frequency range | 10 Hz to 163.8 kHz }} | |||
{{Spec | Frequency accuracy | 0.01% }} | |||
{{Spec | Output level | +28 dBm to −72.45 dBm into 600 Ω, balanced mode. }} | |||
{{Spec | Output impedance | 600 Ω, 150 Ω or 50 Ω }} | |||
{{Spec | Distortion | < 0.001% (−100 dB) from 20 Hz to 20 kHz }} | |||
{{Spec | Sync output | LSTTL compatible output signal squarewave }} | |||
{{Spec | Other modes | | |||
* Square Wave output up to 16.38 KHz | |||
* SMPTE/Din test signal | |||
* CCIF test signal | |||
* Burst signals | |||
* External Amplifier functionality | |||
* 0-10V stairstep ramp output in sweep mode, combined with pen lift signal | |||
}} | |||
{{EndSpecs}} | |||
==Pictures== | ==Pictures== | ||
Latest revision as of 09:13, 29 March 2025
The Tektronix SG5010 is an audio signal generator plug-in for the TM5000 system. It was co-introduced with the AA5001 audio analyzer to form an automated audio test system.
The designers of the SG5010 were Bruce Hofer, Bob Metzler, Richard Cabot, and Bob Wright.
Key Specifications
| Frequency range | 10 Hz to 163.8 kHz |
|---|---|
| Frequency accuracy | 0.01% |
| Output level | +28 dBm to −72.45 dBm into 600 Ω, balanced mode. |
| Output impedance | 600 Ω, 150 Ω or 50 Ω |
| Distortion | < 0.001% (−100 dB) from 20 Hz to 20 kHz |
| Sync output | LSTTL compatible output signal squarewave |
| Other modes |
|
Pictures
-
-
SG5010 front
-
-
