7504

Tektronix 7504
90 MHz non-storage mainframe Tektronix 7504 Produced from 1969 to 1971 Manuals Tektronix 7504 Manual (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 7504 is a 90 MHz 7000-series mainframe, one of the initial oscilloscopes introducing the 7000-Line in 1969. The 7504 development team was led by Wim Velsink.

It is very lavishly built, using contacts embedded in the aluminium frame for interconnecting the gold plated circuit boards. It also features the 7000-series remote control connector on the rear panel.

It can take two 7000-series vertical plug-ins and two 7000-series horizontal plug-ins., and was in production for about one year.

Key Specifications

Bandwidth	90 MHz
Fastest calibrated sweep	5 ns/Div
Calibrator	DC, square wave (1 kHz or ½ B Sweep gate), 4 mV to 40 V in decade steps (2/20/200/400 mV into 50 Ω); 40 mA current loop
Vertical modes	Left / Alt / Add / Chop / Right
Horizontal modes	A / Alt / Chop / B
Trigger Source	Left / Vert Mode / Right
Inputs	Z Axis High Speed (60 V_p-p, DC−75 MHz) Z Axis High Sensitivity (2 V_p-p, DC−2 MHz; 0.4 V_p-p @ 10 MHz)
Outputs	Vertical Signal Out (25 mV/Div into 50 Ω, 0.5 V/Div into 1 MΩ) +Sawtooth +Gate camera power probe power
CRT	8x10 Div @ 1 cm/Div internal gradicule, 154-0608-00 with P31 phosphor 18 kV acceleration (+15/-2.96)
Options	Opt.01 – without readout Opt.02 – X-Y compensation network Opt.03 – EMI shielding
Power	90−136 V or 180−272 V, 48−440 Hz, 280 W max.
Weight	24.6 kg (54 lb)
Size	34.2 cm × 30.5 cm × 62.2 cm (H×W×L) (13.5 in x 12.0 in x 24.6 in)

Operation

The 7504 has several modes of operation, all outlined in the manual:

Single-Trace Display: Vertical Mode: Left, Horizontal Mode: A. Single-trace vertical plugin installed in the left vertical compartment, single-timebase plugin installed in horizontal compartment A.; Provides a display of a single-trace vertical unit against one time-base unit.; Note: Any combination of one vertical and one horizontal plugin can be chosen as needed.
Dual-Trace Display: Vertical Mode: Alt or Chop, Horizontal Mode: A. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugin installed in horizontal compartment A.; Provides a display of two single-trace vertical units against one time-base unit.
Dual-Sweep Display: Vertical Mode: Left, Horizontal Mode: Alt or Chop. Single-trace vertical plugin installed in the left vertical compartment, single-timebase plugins installed in both horizontal compartments.; Provides a dual-sweep display of a single-trace vertical unit against two time-base units.
Dual-Trace/Dual-Sweep Display: Vertical Mode: Chop, Horizontal Mode: Alt or Chop. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugins installed in both horizontal compartments.; Provides a dual-trace, dual-sweep display of two single-trace vertical units against two time-base units (four total traces)
Sweep-Slaving Display: Vertical Mode: Alt, Horizontal Mode: Alt or Chop. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugins installed in both horizontal compartments.; Provides a dual-trace, dual-sweep display where the left vertical plugin is displayed at the sweep rate of the B timebase plugin, and similarly for the right vertical and B horizontal plugins.
Delayed-Sweep Display: Vertical Mode: Left, Horizontal Mode: Alt or Chop. Single-trace vertical plugin installed in the left vertical compartment. Delaying timebase plugin installed in horizontal compartment A, and a single-timebase plugin installed in horizontal-compartment B.; Provides a simultaneous display of a delaying timebase and delayed timebase, providing an effective "zoom" function.
X-Y Display: Vertical Mode: Left, Horizontal Mode: A. Single-trace vertical plugins installed in both the left vertical compartment and the A horizontal compartment.; The X signal is input into the A horizontal plugin while the Y signal is input into the left vertical plugin. Alternatively, some 7B series timebase plugins include X-Y capability.

Due to the modular design of the instrument, there are many more possible modes of operation. For example, horizontal plugins can be installed in both the vertical and horizontal plugins to provide a raster display, or dual-trace plugins can be used in any of the above configurations.

Internals

Like other 75xx and 76xx mainframes, the 7504 has a linear power supply, as opposed to the switchmode supplies used in the later 4-slot mainframes.

It is equipped with a rear remote control connector similar to the 7904 but lacking the remote readout features, and two probe power connectors.

Logic, channel switching, and readout use the classic TEK 7000 series custom ICs (155-0009-00 to 155-0022-00), the vertical amplifier (also designed by Andrews) and the horizontal amplifier are completely discrete.

The 7504 does not implement the Aux Y input (B16), therefore the Trace Separation control on a 7B92/7B92A will have no effect.

The 7504 contains a mercury-based elapsed time meter on the low voltage regulator board.

Links

Documents Referencing 7504

Document	Class	Title	Year	Links
Tekscope 1969 V1 N5 Oct 1969.pdf	Article	Introducing the New Generation	1969	7000-series scopes • 7504 • 7704 • 7A11 • 7A12 • 7A13 • 7A14 • 7A16 • 7A22 • 7S11 • 7M11 • 7B50 • 7B51 • 7B70 • 7B71 • 7T11 • R5030 • 7000 series readout system • Miniature relays • Cam switches • Industrial Design • T7500 • T7700 • P6052 • P6053 • C-50 • C-51 • 204-2
Tekscope 1969 V1 N6 Dec 1969.pdf	Article	A New Logic for Oscilloscope Displays	1969	7000-series scopes • 7A11 • 7A12 • 7A13 • 7A14 • 7A16 • 7A22 • 7B50 • 7B51 • 7B70 • 7B71 • 7S11 • 7T11 • 7504 • 7704
Tekscope 1970 V2 N3 Jun 1970.pdf	Article	The 7000-Series Oscilloscopes as Signal Sources	1970	7704 • 7504 • 7503

Patents that may apply to 7504

Page	Title	Inventors	Filing date	Grant date	Links
Patent US 3453403A	Power selection device	Eldon Hoffman	1966-08-18	1969-07-01	115 • 140 • 141 • 141A • 144 • 145 • 146 • 147 • 148 • 149 • 149A • 230 • 284 • 286 • 453 • 454 • 491 • 520A • 521A • 522 • 545B • 547 • 556 • 561B • 564B • 568 • 576 • 611 • 647A • 2101 • 2601 • 5030 • R5030 • 5031 • R5031 • 7503 • 7504 • 7704 • 7704A • 7904 • R7903

Pictures

The right side internals of an Opt.01 7504 (no readout). Note the blanking plate installed in place of the readout board.

Components

Some Parts Used in the 7504

Part	Part Number(s)	Class	Description	Used in
120-0626-00	120-0626-00	Discrete component	power transformer	7504
155-0009-00	155-0009-00	Monolithic integrated circuit	horizontal lockout logic	7504 • 7514 • 7704 • 7704A • R7704 • 7834 • 7844 • 7854 • 7904 • R7903 • 7904A • 7934 • 7104
155-0010-00	155-0010-00	Monolithic integrated circuit	chop divider and blanking	7504 • 7514 • 7704 • R7704 • 7704A • 7834 • 7854 • 7904 • R7903 • 7904A • 7934 • 7104
155-0011-00	155-0011-00	Monolithic integrated circuit	clock and chop blanking	485 • 7313 • 7403N • R7403N • 7503 • 7504 • 7514 • 7603 • AN/USM-281C • 7613 • 7623 • 7623A • 7633 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • 7904 • 7904A • R7903 • R7912 • 7912AD • 7912HB • 7934 • 7104 • R7103 • AN/USM-281C
155-0012-00	155-0012-00	Monolithic integrated circuit	Z Axis Logic	485 • 7504 • 7514 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • 7904 • R7903 • 7904A • R7912 • 7934 • 7912AD • 7912HB • 7104 • R7103
155-0013-00	155-0013-00 • 155-0013-01	Monolithic integrated circuit	horizontal chop and alt. binary	7504 • 7514 • 7704 • R7704 • 7704A • 7834 • 7854 • 7904 • 7904A • R7903 • 7934 • 7104
155-0022-00	155-0022-00 • 155-0022-01	Monolithic integrated circuit	analog multiplexer	147 • 148 • 149 • 335 • 468 • 1430 • 1441 • 1461 • 1900 • 1910 • 2220 • 2221 • 2230 • 5223 • 5403 • 5440 • 5441 • 5443 • 5444 • 5A38 • 7313 • 7403N • 7503 • 7504 • 7514 • 7603 • AN/USM-281C • 7613 • 7623 • 7623A • 7633 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • R7912 • 7912AD • 7912HB • 7904 • R7903 • 7904A • 7934 • 7A12 • 7A18 • 7A18A • 7A18N • 7B52 • 7B53N • 7D10 • 7D11 • 7D12 • NT-7000 • P7001
2N3739	151-0201-00	Discrete component	Silicon NPN power transistor	013-002 • 106 • 4501 • 561B • R561B • 564B • R564B • 568 • 7503 • 7504
T7500	154-0608-00	CRT	CRT	7503 • 7504

Custom ICs used in the 7000 series readout system

Page	Model	Part nos	Description	Designers	Used in
155-0014-01	M019D	155-0014-00 • 155-0014-01	analog-to-decimal converter	Barrie Gilbert	7000 series readout system • 7854 • 7934 • 7J20 • 7L5 • P7001
155-0015-01	M020F	155-0015-00 • 155-0015-01	analog data switch	Barrie Gilbert	7000 series readout system • 7854 • 7934
155-0017-00	M025	155-0017-00	5 MHz decade counter	Barrie Gilbert	7000 series readout system • 7854 • 7934
155-0018-00	M026	155-0018-00	zeros logic control	Les Larson	7000 series readout system • 7934
155-0019-00	M027	155-0019-00	decimal point and spacing control	Les Larson	7000 series readout system
155-0020-00	M028	155-0020-00	output assembler	Les Larson	7000 series readout system
155-0021-00	M029C	155-0021-00 • 155-0021-01	timing generator	Les Larson	7000 series readout system • 7854 • 7934
155-0023-00	M160	155-0023-00	character generator (0 1 2 3 4 5 6 7 8 9)	Barrie Gilbert	7000 series readout system
155-0024-00	M161	155-0024-00	character generator (↓ < I / + - + C Δ >)	Barrie Gilbert	7000 series readout system
155-0025-00	M162	155-0025-00	character generator (m μ n p X K M G T R)	Barrie Gilbert	7000 series readout system
155-0026-00	M163	155-0026-00	character generator (S V A W H d B c Ω E)	Barrie Gilbert	7000 series readout system
155-0027-00	M164	155-0027-00	character generator (U N L Z Y P F J Q D)	Barrie Gilbert	7000 series readout system