DM501: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(16 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{TM500 | mfg=Tektronix | type=DM501 | function=4½ digit True RMS (DM501A only) multimeter | class=multimeter | image=DM501 front.jpg | introduced=1972 | discontinued=1984 |
{{TM500 | mfg=Tektronix | type=DM501 | function=4½ digit multimeter | class=multimeter | image=Tek DM501.JPG | introduced=1972 | discontinued=1980 |
manuals=
designers= |manuals=
* [http://w140.com/tek_dm501.pdf Tektronix DM501 Manual (PDF)]
* [[Media:070-1446-00.pdf|Tektronix DM501 Manual]]
* [http://w140.com/tek_dm501a_070-2749-00_with_schematics.pdf Tektronix DM501A Manual (PDF, complete with schematics)]
* [http://w140.com/tek_dm501a.pdf Tektronix DM501A Manual (PDF, no schematics)]
* [http://w140.com/tekwiki/images/9/96/DM501A_schematics.pdf Tektronix DM501A Schematics (PDF)]
}}
}}
(See [[DM501A]] for the significantly different successor model.)


It also has a temperature input, requiring the [[P6058]] or [[P6430]] temperature probe (DM501A: [[P6601]] PT-100 probe).
It also has a temperature input, requiring the [[P6058]] temperature probe with a 4-pin [[LEMO S-series connector]].  The manual states that ''certain NPN transistors such as a 2N2484 may be used as temperature sensors in place of the probe with little or no selection of the transistor''.


The '''DM501 MOD718D''' variant replaced the temperature range with a 200 mV input range providing 10 μV resolution
The '''DM501 MOD718D''' variant replaced the temperature range with a 200 mV input range providing 10 μV resolution (see [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook]]).
(see [[Media:Physical Measurements Handbook.pdf | Physical Measurements Handbook]]).


{{BeginSpecs}}
{{Spec | DC Voltage | 2 V<sub>DC</sub> to 200 V<sub>DC</sub> in decade ranges (0.1% + 0.01% FS), 1000 V<sub>DC</sub> (0.1% + 0.02% FS); Input resistance 10 MΩ, CMRR >100 dB at DC, 80 dB at 60 Hz (1 kΩ unbal.), NMRR ≥30 dB at 60 Hz + 20 dB/decade }}
{{Spec | AC Voltage | 2 V<sub>DC</sub> to 200 V<sub>AC</sub> in decade ranges, and 500 V<sub>AC</sub> (0.7% + 0.01% FS for sine inputs only); Input impedance 10 MΩ // ≤70 pF, CMRR unspecified }}
{{Spec | DC Current | 2 mA to 2 A in decade ranges, 0.2% + 0.05% FS }}
{{Spec | AC Current | 2 mA to 2 A in decade ranges, 0.6% + 0.05% FS (for 40 Hz to 1 kHz sine) }}
{{Spec | Ohms | 2 kΩ to 20 MΩ in decade ranges, current 1 mA to 0.1 μA respectively; 0.3% (20 MΩ: 0.5%) + 0.01% FS }}
{{Spec | Temperature | –55°C to +125°C (±1.5°C), +125°C to 150°C (±2.5°C) }}
{{EndSpecs}}


==Specifications==
===Options===
{|class="wikitable"
* Option 1: Ordering without P6058 Temp Probe
|+ Specification according to manual, see discussion  page
* Option 2: Without Temp Capability and Probe (visible by no ''Temp Out'' at the Front)
|-
! style="text-align:left;"| Range !! DM501 (15°C...35°C) !! DM501A (18°C...28°C)
|-
! Accuracy DC Voltmeter
|-
|200  mV<sub>DC</sub>|| N/A || 0.05%  + 0.015% FS
|-
|2  V<sub>DC</sub>||0.1% + 0.01% FS||0.05% + 0.01% FS
|-
|20  V<sub>DC</sub>||0.1% + 0.01% FS||0.05% +  0.01% FS
|-
|200  V<sub>DC</sub>||0.1% + 0.01% FS||0.05% + 0.01% FS
|-
|1000 V<sub>DC</sub>||0.1% + 0,02% FS||0.05% + 0.02% FS
|-
! Charactersitics DC Voltmeter
|-
|Input Resistance || colspan="2" style="text-align:center"|10 MΩ
|-
|CMRR || >100dB at DC; 80dB at 60Hz; 1  kΩ unbal. || >100dB at DC; 80dB at 50 & 60 Hz; 1  kΩ unbal.
|-
|NMRR || ≥30dB at 60Hz +20dB/decade || 60dB at 50Hz or 60 Hz +0.2 Hz
|-
! Accuracy AC Voltmeter 40 Hz ... 10 kHz  || Sine Wave || True RMS
|-
|200 mV<sub>AC</sub> || N/A || 0.6% + 0.05% FS True RMS
|-
| 2 V<sub>AC</sub>||0.7% +0.01% FS @ sine wave|| 0.6% +0.05% FS True RMS
|-
| 20  V<sub>DC</sub> || 0.7% +0.01% FS @ sine wave||  0.6% +0.05% FS True RMS
|-
| 200  V<sub>DC</sub> || 0.7% +0.01% FS @ sine wave||  0.6% +0.05% FS True RMS
|-
| 500  V<sub>DC</sub> || 0.7% +0.01% FS @ sine wave||  0.6% +0.2% FS True RMS
|-
! Charactersitics AC Voltmeter
|-
|Input Impedance ||10 MΩ paralleled by <70 pF || 10 MΩ paralleled by 160 pF
|-
|CMRR || Unknown || 60dB @ 50Hz and 60Hz with 1 kΩ unbalance
|-
! Accuracy Ohmmeter
|-
|200 Ω || N/A || 0.15% + 0.015% FS @ 1 mA
|-
|2 kΩ|| 0.3% + 0.01% FS @ 1 mA|| 0.15% + 0.015% FS @ 0.1/ 1 mA
|-
|20 kΩ||  0.3% + 0.01% FS @ 0.1 mA || 0.15% + 0.015% FS @ 10/ 100 µA
|-
|200 kΩ||  0.3% + 0.01% FS @ 10 μA|| 0.15% + 0.015% FS @ 1/ 10 µA
|-
| 2 MΩ||  0.3% + 0.01% FS @ 1 µA || 0.15% + 0.015% FS @ 1 µA (0.3%+0.015%FS @ 0.1 µA)
|-
| 20 MΩ|| 0.5% + 0.01% FS @ 0.1 µA|| 0.5% + 0.015% FS @ 0.1 µA
|-
! Accuracy DC Ammeter
|-
|200 µA || N/A || 0.2%0.015%FS @ 1 kΩ
|-
|2 mA || 0.2%+0.05%FS @ 100.1 Ω|| 0.2%0.015%FS @ 100 Ω
|-
| 20 mA ||  0.2%+0.05%FS @ 10.1 Ω || 0.2%0.015%FS @ 10.2 Ω
|-
|200 mA ||  0.2%+0.05%FS @ 1.1 Ω || 0.2%0.015%FS @ 1.2 Ω
|-
|2000 mA ||0.2%+0.05%FS @ 0.2 Ω || 0.2%0.015%FS @ 0.4 Ω
|-
! Accuracy AC Ammeter || 40 Hz...1 kHz sine wave || 20 Hz...10 kHz sine wave / I<sub>meas</sub>>5%FS
|-
|200µA || N/A || 0.6%+0.05%FS @ 1 kΩ
|-
| 2 mA || 0.6%+0.01%FS @ 100.1 Ω|| 0.6%+ 0.05% FS @ 100 Ω
|-
| 20 mA ||  0.6%+0.01%FS @ 10.1 Ω || 0.6%+ 0.05% FS @ 10.2 Ω
|-
| 200 mA ||  0.6%+0.01%FS @ 1.1 Ω|| 0.6%+ 0.05% FS @ 1.2 Ω
|-
| 2000 mA ||  0.6%+0.01%FS @ 0.2 Ω|| 0.6%+ 0.05% FS @ 0.4 Ω
|-
! Accuracy Temperature || [[P6058]] Probe (V<sub>BE</sub>) || [[P6601]] (PT100) Probe calibrated to instrument
|-
| -62°C...-55°C||  N/A  || ±2°C (±4°C any probe, uncal.)
|-
| -55°C...125°C|| ±1.5°C || ±2°C (±4°C any probe, uncal.)
|-
| 125°C...150°C|| ±2.5°C || ±2°C (±4°C any probe, uncal.)
|-
| 150°C...240°C|| N/A    || +0°C/-6°C (+2°C/-8°C any probe, uncal.)
|}


==Pictures==
==Links==
* [https://www.youtube.com/watch?v=GaSy1MezeNs                                  Tektronix DM501 Check in and Calibration] by Zenwizard Studios @ YouTube
{{Documents|Link=DM501}}
{{PatentLinks|DM501}}


==Rear interface==
The DM501 has a rear input, selectable by a front-panel button, on B28 (Hi) / A29 (Lo), and digit-serial BCD outputs (TTL), see below.
The manual does not specify a limit to the input voltage on the rear interface but since this uses card-edge pins adjacent to logic output pins, sticking to the the DM501A specification (200 V peak / 100 V RMS) appears prudent.


===DM501===
==Internals==
<gallery>
The DM501 is precise to 4½ digits, but not accurate to 4½ digits. The combination of an ADC built from opamps and discretes combined with a noisy high-frequency isolated power supply make for barely achievable 3½ digit accuracy over all ranges. Every TM500 DVM after the 501 (including the [[DM501A]], the [[DM502]], and so on) used integrated A-to-D converters and a mains-frequency isolated power supply.
DM501 front.jpg | DM501
DM501_open_left.jpg|DM501 open left side
Tek_DM501_integrator_pcb-comp_side.jpg|DM501 integrator board
Tek_DM501_integrator_pcb-solder_side.jpg|DM501 integrator board solder side


</gallery>
==Pictures==


===DM501A===
<gallery>
<gallery>
Tek dm501a on.jpg|DM501A
DM501 front.jpg     | DM501
Tek dm501a 1.jpg | DM501A
DM501_open_left.jpg | DM501 open left side
Tek dm501a ext1.jpg|DM501A Option 2 (no temperature range) on an extension cable
Tek_DM501_integrator_pcb-comp_side.jpg | DM501 integrator board
Tek dm501a dark.jpg|DM501A
DM501 1977.jpg     | Two late DM501s with modified integrator boards
DM501A_rear_con.JPG|DM501A rear connector
Tek_DM501_integrator_pcb-solder_side.jpg | DM501 integrator board solder side
Tek-DM501A-RHS.jpg| DM501A RHS
DM501 rear interface.png | DM501 rear interface
TEK-DM501A-LHS.jpg| DM501A LHS
Tek-DM501A-LHS-removed shielding.jpg| DM501A LHS- removed shielding
</gallery>
</gallery>


 
==Components==
* [http://w140.com/tekwiki/images/d/d5/Siliconix_LD120_and_LD121A_datasheets.pdf Siliconix LD120 and LD121A datasheets]
{{Parts|DM501}}
* [http://w140.com/tekwiki/wiki/Fairchild_3814 Fairchild 3814 counter IC]
* [http://w140.com/tekwiki/wiki/307-1015-00 307-1015-00 input voltage divider]

Latest revision as of 04:43, 31 October 2024

Tektronix DM501
4½ digit multimeter
Tektronix DM501

Produced from 1972 to 1980

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix DM501 is a 4½ digit multimeter plug-in for the TM500 system.

(See DM501A for the significantly different successor model.)

It also has a temperature input, requiring the P6058 temperature probe with a 4-pin LEMO S-series connector. The manual states that certain NPN transistors such as a 2N2484 may be used as temperature sensors in place of the probe with little or no selection of the transistor.

The DM501 MOD718D variant replaced the temperature range with a 200 mV input range providing 10 μV resolution (see Physical Measurements Handbook).

Key Specifications

DC Voltage 2 VDC to 200 VDC in decade ranges (0.1% + 0.01% FS), 1000 VDC (0.1% + 0.02% FS); Input resistance 10 MΩ, CMRR >100 dB at DC, 80 dB at 60 Hz (1 kΩ unbal.), NMRR ≥30 dB at 60 Hz + 20 dB/decade
AC Voltage 2 VDC to 200 VAC in decade ranges, and 500 VAC (0.7% + 0.01% FS for sine inputs only); Input impedance 10 MΩ // ≤70 pF, CMRR unspecified
DC Current 2 mA to 2 A in decade ranges, 0.2% + 0.05% FS
AC Current 2 mA to 2 A in decade ranges, 0.6% + 0.05% FS (for 40 Hz to 1 kHz sine)
Ohms 2 kΩ to 20 MΩ in decade ranges, current 1 mA to 0.1 μA respectively; 0.3% (20 MΩ: 0.5%) + 0.01% FS
Temperature –55°C to +125°C (±1.5°C), +125°C to 150°C (±2.5°C)

Options

  • Option 1: Ordering without P6058 Temp Probe
  • Option 2: Without Temp Capability and Probe (visible by no Temp Out at the Front)

Links

Documents Referencing DM501

Document Class Title Authors Year Links
Tekscope 1974 V6 N3.pdf Article The 31/53 Calculator-based Measurement Instrumentation Package John Mulvey 1974 31 • 153 • DM501 • DC503
070-2088-00.pdf Book TM500 Series Rear Interface Data Book 1975 AF501 • AM501 • AM502 • DC501 • DC502 • DC503 • DC504 • DC505 • DC505A • DM501 • DM502 • FG501 • FG502 • FG503 • MR501 • PG501 • PG502 • PG505 • PG506 • PG508 • PS501 • PS502 • PS503 • PS503A • PS505 • RG501 • SC501 • SC502 • SG502 • SG503 • TG501
070-2088-01.pdf Book TM500 Series Rear Interface Data Book 1976 AF501 • AM501 • AM502 • AM511 • DC501 • DC502 • DC503 • DC504 • DC505 • DC505A • DD501 • DM501 • DM502 • FG501 • FG502 • FG503 • FG504 • LA501 • MR501 • PG501 • PG502 • PG505 • PG506 • PG508 • PS501 • PS502 • PS503 • PS503A • PS505 • RG501 • SC501 • SC502 • SG502 • SG503 • SG504 • SW503 • TG501 • TR501 • TR502
070-2088-04.pdf Book TM500 Series Rear Interface Data Book 1985 AA501 • AF501 • AM501 • AM502 • AM503 • AM511 • DC501 • DC502 • DC503 • DC503A • DC504 • DC505 • DC505A • DC508 • DC508A • DC509 • DC510 • DC5009 • DC5010 • DD501 • DL502 • DM501 • DM501A • DM502 • DM502A • DM505 • DM5010 • FG501 • FG501A • FG502 • FG503 • FG504 • FG507 • FG5010 • LA501 • LA501W • WR501 • MR501 • PG501 • PG502 • PG505 • PG506 • PG507 • PG508 • PS501 • PS502 • PS503 • PS503A • PS505 • PS5010 • RG501 • SC501 • SC502 • SC503 • SC504 • SG502 • SG503 • SG504 • SG505 • SW503 • TG501 • TR501 • TR502 • MI5010 • MX5010 • SI5010

Patents that may apply to DM501

Page Title Inventors Filing date Grant date Links
Patent US 3562464A Cam actuated switch having movable and fixed contacts on circuit board Howard Vollum • Willem H Verhoef • Tony Sprando 1968-10-07 1971-02-09 Cam switches • 2101 • 2701 • 2703 • 432 • 434 • 465 • 475 • 5A15N • 5A18N • 5A20N • 5A21N • 5A38 • 5A45 • 5B10N • 5B12N • 7A15 • 7A16A • 7A18 • 7A19 • 7A24 • 7A26 • 7B10 • 7B15 • 7B50 • 7B51 • 7B52 • 7B53A • 7B50A • 7B70 • 7B71 • 7B80 • 7B85 • 7B87 • 7B92 • 7B92A • 7D01 • 7D12 • 7D15 • 7J20 • 7S12 • 7T11 • 7T11A • AF501 • AM502 • AM503 • DC502 • DC503 • DC504 • DC505 • DM501 • DM502 • FG501 • FG501A • FG502 • FG503 • FG504 • FG507 • PG501 • PG502 • PG505 • PG506 • PG506A • PG508 • TG501 • SC502 • SC503 • SC504

Rear interface

The DM501 has a rear input, selectable by a front-panel button, on B28 (Hi) / A29 (Lo), and digit-serial BCD outputs (TTL), see below. The manual does not specify a limit to the input voltage on the rear interface but since this uses card-edge pins adjacent to logic output pins, sticking to the the DM501A specification (200 V peak / 100 V RMS) appears prudent.

Internals

The DM501 is precise to 4½ digits, but not accurate to 4½ digits. The combination of an ADC built from opamps and discretes combined with a noisy high-frequency isolated power supply make for barely achievable 3½ digit accuracy over all ranges. Every TM500 DVM after the 501 (including the DM501A, the DM502, and so on) used integrated A-to-D converters and a mains-frequency isolated power supply.

Pictures

  • DM501

    DM501

  • DM501 open left side

    DM501 open left side

  • DM501 integrator board

    DM501 integrator board

  • Two late DM501s with modified integrator boards

    Two late DM501s with modified integrator boards

  • DM501 integrator board solder side

    DM501 integrator board solder side

  • DM501 rear interface

    DM501 rear interface

Components

Some Parts Used in the DM501

Part Part Number(s) Class Description Used in
307-1015-00 307-1015-00 Discrete component resistor network DM501
Fairchild 3814 156-0306-00 Monolithic integrated circuit 4½ digit dual-slope DVM controller 7A13 • 7L13 • 7L18 • DM501
Retrieved from "https://w140.com/tekwiki/index.php?title=DM501&oldid=98101"