7504: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(28 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar |
{{Oscilloscope Sidebar  
title=Tektronix 7504 |
|manufacturer=Tektronix
image=7504-front.jpg |
|series=7000-series scopes
caption=Tektronix 7504 |
|model=7504  
introduced=1969 |
|summary=90 MHz non-storage mainframe
discontinued=1971 |
|image=7504-front.jpg
summary=100 MHz non-storage mainframe |
|caption=Tektronix 7504
manuals=
|introduced=1969
* [http://w140.com/tek_7504_ocr.pdf Tektronix 7504 Manual (PDF)]
|discontinued=1971
|designers=Wim Velsink
|manuals=
* [[Media:070-0932-01.pdf|Tektronix 7504 Manual]]
}}
}}
The '''Tektronix 7504''' is a 90 MHz 7000-series mainframe, one of the initial oscilloscopes introducing the [[Introduction_to_the_7000-Series|7000-Line]] [[introduced in 1969|in 1969]].
The 7504 development team was led by [[Wim Velsink]].


The '''Tektronix 7504''' is a 100 MHz 7000-series mainframe [[introduced in 1969]].
It is very lavishly built, using contacts embedded in the aluminium frame for interconnecting the gold plated circuit boards. It also features the [[7000-series remote control connector]] on the rear panel.
It contains 4 plug-in compartments, and was in production for about one year.
 
It can take two [[7000-series_plug-ins#Vertical plug-ins|7000-series vertical plug-ins]] and two [[7000-series_plug-ins#Horizontal plug-ins|7000-series horizontal plug-ins]]., and was in production for about one year.


{{BeginSpecs}}
{{BeginSpecs}}
{{Spec |Bandwidth | 90 MHz}}
{{Spec | Bandwidth | 90 MHz}}
{{Spec | Fastest calibrated sweep | 5 ns/Div }}
{{Spec | Calibrator | DC, square wave (1 kHz or ½ B Sweep gate), 4 mV to 40 V in decade steps (2/20/200/400 mV into 50 Ω); 40 mA current loop }}
{{Spec | Vertical modes | Left / Alt / Add / Chop / Right }}
{{Spec | Horizontal modes | A / Alt / Chop / B }}
{{Spec | Trigger Source | Left / Vert Mode / Right }}
{{Spec | Inputs |
* Z Axis High Speed (60 V<sub>p-p</sub>, DC−75 MHz)
* Z Axis High Sensitivity (2 V<sub>p-p</sub>, DC−2 MHz; 0.4 V<sub>p-p</sub> @ 10 MHz)
}}
{{Spec | Outputs |
* Vertical Signal Out (25 mV/Div into 50 Ω, 0.5 V/Div into 1 MΩ)
* +Sawtooth
* +Gate
* camera power
* probe power
}}
{{Spec | CRT | 8x10 Div @ 1 cm/Div internal gradicule, [[154-0608-00]] with P31 [[phosphor]] 18 kV acceleration (+15/-2.96) }}
{{Spec | Options |
* Opt.01 – without readout
* Opt.02 – X-Y compensation network
* Opt.03 – EMI shielding
}}
{{Spec | Power | 90−136 V or 180−272 V, 48−440 Hz, 280 W max. }}
{{Spec | Weight| 24.6 kg (54 lb) }}
{{Spec | Size |
: 34.2 cm × 30.5 cm × 62.2 cm (H×W×L)
: (13.5 in x 12.0 in x 24.6 in)
}}
{{EndSpecs}}
{{EndSpecs}}
==Operation==
The 7504 has several modes of operation, all outlined in the manual:
; Single-Trace Display:
: Vertical Mode: Left, Horizontal Mode: A. Single-trace vertical plugin installed in the left vertical compartment, single-timebase plugin installed in horizontal compartment A.
: Provides a display of a single-trace vertical unit against one time-base unit.
: Note: Any combination of one vertical and one horizontal plugin can be chosen as needed.
; Dual-Trace Display:
: Vertical Mode: Alt or Chop, Horizontal Mode: A. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugin installed in horizontal compartment A.
: Provides a display of two single-trace vertical units against one time-base unit.
; Dual-Sweep Display:
: Vertical Mode: Left, Horizontal Mode: Alt or Chop. Single-trace vertical plugin installed in the left vertical compartment, single-timebase plugins installed in both horizontal compartments.
: Provides a dual-sweep display of a single-trace vertical unit against two time-base units.
; Dual-Trace/Dual-Sweep Display:
: Vertical Mode: Chop, Horizontal Mode: Alt or Chop. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugins installed in both horizontal compartments.
: Provides a dual-trace, dual-sweep display of two single-trace vertical units against two time-base units (four total traces)
; Sweep-Slaving Display:
: Vertical Mode: Alt, Horizontal Mode: Alt or Chop. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugins installed in both horizontal compartments.
: Provides a dual-trace, dual-sweep display where the left vertical plugin is displayed at the sweep rate of the B timebase plugin, and similarly for the right vertical and B horizontal plugins.
; Delayed-Sweep Display:
: Vertical Mode: Left, Horizontal Mode: Alt or Chop. Single-trace vertical plugin installed in the left vertical compartment. Delaying timebase plugin installed in horizontal compartment A, and a single-timebase plugin installed in horizontal-compartment B.
: Provides a simultaneous display of a delaying timebase and delayed timebase, providing an effective "zoom" function.
; X-Y Display:
: Vertical Mode: Left, Horizontal Mode: A. Single-trace vertical plugins installed in both the left vertical compartment and the A horizontal compartment.
: The X signal is input into the A horizontal plugin while the Y signal is input into the left vertical plugin. Alternatively, some 7B series timebase plugins include X-Y capability.
Due to the modular design of the instrument, there are many more possible modes of operation. For example, horizontal plugins can be installed in both the vertical and horizontal plugins to provide a raster display, or dual-trace plugins can be used in any of the above configurations.


==Internals==
==Internals==
Unlike later four-slot mainframes, the 7504 has a linear power supply. It is equipped with a [[7503, 7504, 7904 remote control connector|rear remote control connector]] similar to the [[7904]] but lacking the remote readout features.  
Like other 75xx and 76xx mainframes, the 7504 has a linear power supply, as opposed to the switchmode supplies used in the later 4-slot mainframes.  
 
It is equipped with a [[7000-series remote control connector|rear remote control connector]] similar to the [[7904]] but lacking the remote readout features, and two [[probe power]] connectors.
 
Logic, channel switching, and [[7000_series_readout_system|readout]] use the classic TEK 7000 series custom ICs ([[155-0009-00]] to [[155-0022-00]]), the vertical amplifier (also designed by Andrews) and the horizontal amplifier are completely discrete. 
 
The 7504 does not implement the [[7000 Series plug-in interface|Aux Y input (B16)]], therefore the Trace Separation control on a [[7B92]]/[[7B92A]] will have no effect.
 
The 7504 contains a mercury-based [[elapsed time meter]] on the low voltage regulator board.


==Links==
==Links==
Line 24: Line 93:
* [http://golddredgervideo.com/kc0wox/tek/7504/ Troubleshooting a 7504 @ KC0WOX] / [http://golddredgervideo.com/kc0wox/tek/7504/detailedpictures.htm Detailed internal pictures]
* [http://golddredgervideo.com/kc0wox/tek/7504/ Troubleshooting a 7504 @ KC0WOX] / [http://golddredgervideo.com/kc0wox/tek/7504/detailedpictures.htm Detailed internal pictures]
* [http://www.barrytech.com/tektronix/tek7000/tek7504.html Tektronix 7504 @ barrytech.com]
* [http://www.barrytech.com/tektronix/tek7000/tek7504.html Tektronix 7504 @ barrytech.com]
{{Documents|Link=7504}}
{{PatentLinks|7504}}


==Pictures==
==Pictures==
Line 32: Line 103:
75044.JPG
75044.JPG
7504.jpg
7504.jpg
Tek 7504 internal 1.jpeg
Tek 7504 internal 2.jpeg
Tek 7504 internal 3.jpeg
Tek 7504 internal 4.jpeg | The right side internals of an Opt.01 7504 (no readout). Note the blanking plate installed in place of the readout board.
</gallery>
</gallery>


==Components==
{{Parts|7504}}
{{Custom ICs|7000 series readout system}}


[[Category:7000 series mainframes with linear power supplies]]
[[Category:7000 series non-storage mainframes]]
[[Category:7000 series non-storage mainframes]]

Latest revision as of 17:07, 24 August 2024

Tektronix 7504
90 MHz non-storage mainframe
Tektronix 7504

Produced from 1969 to 1971

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 7504 is a 90 MHz 7000-series mainframe, one of the initial oscilloscopes introducing the 7000-Line in 1969. The 7504 development team was led by Wim Velsink.

It is very lavishly built, using contacts embedded in the aluminium frame for interconnecting the gold plated circuit boards. It also features the 7000-series remote control connector on the rear panel.

It can take two 7000-series vertical plug-ins and two 7000-series horizontal plug-ins., and was in production for about one year.

Key Specifications

Bandwidth 90 MHz
Fastest calibrated sweep 5 ns/Div
Calibrator DC, square wave (1 kHz or ½ B Sweep gate), 4 mV to 40 V in decade steps (2/20/200/400 mV into 50 Ω); 40 mA current loop
Vertical modes Left / Alt / Add / Chop / Right
Horizontal modes A / Alt / Chop / B
Trigger Source Left / Vert Mode / Right
Inputs
  • Z Axis High Speed (60 Vp-p, DC−75 MHz)
  • Z Axis High Sensitivity (2 Vp-p, DC−2 MHz; 0.4 Vp-p @ 10 MHz)
Outputs
  • Vertical Signal Out (25 mV/Div into 50 Ω, 0.5 V/Div into 1 MΩ)
  • +Sawtooth
  • +Gate
  • camera power
  • probe power
CRT 8x10 Div @ 1 cm/Div internal gradicule, 154-0608-00 with P31 phosphor 18 kV acceleration (+15/-2.96)
Options
  • Opt.01 – without readout
  • Opt.02 – X-Y compensation network
  • Opt.03 – EMI shielding
Power 90−136 V or 180−272 V, 48−440 Hz, 280 W max.
Weight 24.6 kg (54 lb)
Size
34.2 cm × 30.5 cm × 62.2 cm (H×W×L)
(13.5 in x 12.0 in x 24.6 in)

Operation

The 7504 has several modes of operation, all outlined in the manual:

Single-Trace Display
Vertical Mode: Left, Horizontal Mode: A. Single-trace vertical plugin installed in the left vertical compartment, single-timebase plugin installed in horizontal compartment A.
Provides a display of a single-trace vertical unit against one time-base unit.
Note: Any combination of one vertical and one horizontal plugin can be chosen as needed.
Dual-Trace Display
Vertical Mode: Alt or Chop, Horizontal Mode: A. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugin installed in horizontal compartment A.
Provides a display of two single-trace vertical units against one time-base unit.
Dual-Sweep Display
Vertical Mode: Left, Horizontal Mode: Alt or Chop. Single-trace vertical plugin installed in the left vertical compartment, single-timebase plugins installed in both horizontal compartments.
Provides a dual-sweep display of a single-trace vertical unit against two time-base units.
Dual-Trace/Dual-Sweep Display
Vertical Mode: Chop, Horizontal Mode: Alt or Chop. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugins installed in both horizontal compartments.
Provides a dual-trace, dual-sweep display of two single-trace vertical units against two time-base units (four total traces)
Sweep-Slaving Display
Vertical Mode: Alt, Horizontal Mode: Alt or Chop. Single-trace vertical plugins installed in both vertical compartments, single-timebase plugins installed in both horizontal compartments.
Provides a dual-trace, dual-sweep display where the left vertical plugin is displayed at the sweep rate of the B timebase plugin, and similarly for the right vertical and B horizontal plugins.
Delayed-Sweep Display
Vertical Mode: Left, Horizontal Mode: Alt or Chop. Single-trace vertical plugin installed in the left vertical compartment. Delaying timebase plugin installed in horizontal compartment A, and a single-timebase plugin installed in horizontal-compartment B.
Provides a simultaneous display of a delaying timebase and delayed timebase, providing an effective "zoom" function.
X-Y Display
Vertical Mode: Left, Horizontal Mode: A. Single-trace vertical plugins installed in both the left vertical compartment and the A horizontal compartment.
The X signal is input into the A horizontal plugin while the Y signal is input into the left vertical plugin. Alternatively, some 7B series timebase plugins include X-Y capability.

Due to the modular design of the instrument, there are many more possible modes of operation. For example, horizontal plugins can be installed in both the vertical and horizontal plugins to provide a raster display, or dual-trace plugins can be used in any of the above configurations.

Internals

Like other 75xx and 76xx mainframes, the 7504 has a linear power supply, as opposed to the switchmode supplies used in the later 4-slot mainframes.

It is equipped with a rear remote control connector similar to the 7904 but lacking the remote readout features, and two probe power connectors.

Logic, channel switching, and readout use the classic TEK 7000 series custom ICs (155-0009-00 to 155-0022-00), the vertical amplifier (also designed by Andrews) and the horizontal amplifier are completely discrete.

The 7504 does not implement the Aux Y input (B16), therefore the Trace Separation control on a 7B92/7B92A will have no effect.

The 7504 contains a mercury-based elapsed time meter on the low voltage regulator board.

Links

Documents Referencing 7504

Document Class Title Authors Year Links
Tekscope 1969 V1 N5 Oct 1969.pdf Article Introducing the New Generation 1969 7000-series scopes • 7504 • 7704 • 7A11 • 7A12 • 7A13 • 7A14 • 7A16 • 7A22 • 7S11 • 7M11 • 7B50 • 7B51 • 7B70 • 7B71 • 7T11 • R5030 • 7000 series readout system • Miniature relays • Cam switches • Industrial Design • T7500 • T7700 • P6052 • P6053 • C-50 • C-51 • 204-2
Tekscope 1969 V1 N6 Dec 1969.pdf Article A New Logic for Oscilloscope Displays 1969 7000-series scopes • 7A11 • 7A12 • 7A13 • 7A14 • 7A16 • 7A22 • 7B50 • 7B51 • 7B70 • 7B71 • 7S11 • 7T11 • 7504 • 7704
Tekscope 1970 V2 N3 Jun 1970.pdf Article The 7000-Series Oscilloscopes as Signal Sources 1970 7704 • 7504 • 7503

Patents that may apply to 7504

Page Title Inventors Filing date Grant date Links
Patent US 3453403A Power selection device Eldon Hoffman 1966-08-18 1969-07-01 115 • 140 • 141 • 141A • 144 • 145 • 146 • 147 • 148 • 149 • 149A • 230 • 284 • 286 • 453 • 454 • 491 • 520A • 521A • 522 • 545B • 547 • 556 • 561B • 564B • 568 • 576 • 611 • 647A • 2101 • 2601 • 5030 • R5030 • 5031 • R5031 • 7503 • 7504 • 7704 • 7704A • 7904 • R7903

Pictures

  • The right side internals of an Opt.01 7504 (no readout). Note the blanking plate installed in place of the readout board.

    The right side internals of an Opt.01 7504 (no readout). Note the blanking plate installed in place of the readout board.

Components

Some Parts Used in the 7504

Part Part Number(s) Class Description Used in
120-0626-00 120-0626-00 Discrete component power transformer 7504
155-0009-00 155-0009-00 Monolithic integrated circuit horizontal lockout logic 7504 • 7514 • 7704 • 7704A • R7704 • 7834 • 7844 • 7854 • 7904 • R7903 • 7904A • 7934 • 7104
155-0010-00 155-0010-00 Monolithic integrated circuit chop divider and blanking 7504 • 7514 • 7704 • R7704 • 7704A • 7834 • 7854 • 7904 • R7903 • 7904A • 7934 • 7104
155-0011-00 155-0011-00 Monolithic integrated circuit clock and chop blanking 485 • 7313 • 7403N • R7403N • 7503 • 7504 • 7514 • 7603 • AN/USM-281C • 7613 • 7623 • 7623A • 7633 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • 7904 • 7904A • R7903 • R7912 • 7912AD • 7912HB • 7934 • 7104 • R7103 • AN/USM-281C
155-0012-00 155-0012-00 Monolithic integrated circuit Z Axis Logic 485 • 7504 • 7514 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • 7904 • R7903 • 7904A • R7912 • 7934 • 7912AD • 7912HB • 7104 • R7103
155-0013-00 155-0013-00 • 155-0013-01 Monolithic integrated circuit horizontal chop and alt. binary 7504 • 7514 • 7704 • R7704 • 7704A • 7834 • 7854 • 7904 • 7904A • R7903 • 7934 • 7104
155-0022-00 155-0022-00 • 155-0022-01 Monolithic integrated circuit analog multiplexer 147 • 148 • 149 • 335 • 468 • 1430 • 1441 • 1461 • 1900 • 1910 • 2220 • 2221 • 2230 • 5223 • 5403 • 5440 • 5441 • 5443 • 5444 • 5A38 • 7313 • 7403N • 7503 • 7504 • 7514 • 7603 • AN/USM-281C • 7613 • 7623 • 7623A • 7633 • 7704 • R7704 • 7704A • 7834 • 7844 • 7854 • R7912 • 7912AD • 7912HB • 7904 • R7903 • 7904A • 7934 • 7A12 • 7A18 • 7A18A • 7A18N • 7B52 • 7B53N • 7D10 • 7D11 • 7D12 • NT-7000 • P7001
2N3739 151-0201-00 Discrete component Silicon NPN power transistor 013-002 • 106 • 4501 • 561B • R561B • 564B • R564B • 568 • 7503 • 7504
T7500 154-0608-00 CRT CRT 7503 • 7504


Custom ICs used in the 7000 series readout system

Page Model Part nos Description Designers Used in
155-0014-01 M019D 155-0014-00 • 155-0014-01 analog-to-decimal converter Barrie Gilbert 7000 series readout system • 7854 • 7934 • 7J20 • 7L5 • P7001
155-0015-01 M020F 155-0015-00 • 155-0015-01 analog data switch Barrie Gilbert 7000 series readout system • 7854 • 7934
155-0017-00 M025 155-0017-00 5 MHz decade counter Barrie Gilbert 7000 series readout system • 7854 • 7934
155-0018-00 M026 155-0018-00 zeros logic control Les Larson 7000 series readout system • 7934
155-0019-00 M027 155-0019-00 decimal point and spacing control Les Larson 7000 series readout system
155-0020-00 M028 155-0020-00 output assembler Les Larson 7000 series readout system
155-0021-00 M029C 155-0021-00 • 155-0021-01 timing generator Les Larson 7000 series readout system • 7854 • 7934
155-0023-00 M160 155-0023-00 character generator (0 1 2 3 4 5 6 7 8 9) Barrie Gilbert 7000 series readout system
155-0024-00 M161 155-0024-00 character generator (↓ < I / + - + C Δ >) Barrie Gilbert 7000 series readout system
155-0025-00 M162 155-0025-00 character generator (m μ n p X K M G T R) Barrie Gilbert 7000 series readout system
155-0026-00 M163 155-0026-00 character generator (S V A W H d B c Ω E) Barrie Gilbert 7000 series readout system
155-0027-00 M164 155-0027-00 character generator (U N L Z Y P F J Q D) Barrie Gilbert 7000 series readout system
Retrieved from "https://w140.com/tekwiki/index.php?title=7504&oldid=96920"