485: Difference between revisions
No edit summary |
No edit summary |
||
(8 intermediate revisions by the same user not shown) | |||
Line 10: | Line 10: | ||
|designers=John Addis;Wink Gross;Gene Andrews;Glenn Bateman;Ron Peltola;Bob Firth;Murlan Kaufman;Bob White;Keith Taylor;Dick Troberg | |designers=John Addis;Wink Gross;Gene Andrews;Glenn Bateman;Ron Peltola;Bob Firth;Murlan Kaufman;Bob White;Keith Taylor;Dick Troberg | ||
|manuals= | |manuals= | ||
* [[Media:070-1193-00.pdf|Tektronix 485 Manual]] ( | * [[Media:070-1193-00.pdf|Tektronix 485 Manual]] (OCR) | ||
* [[Media: | * [[Media:070-1193-00 2.pdf|Tektronix 485 Manual]] (bad-OCR) | ||
* [[Media:Tek 485 cal proc.pdf|Tektronix 485 Calibration Procedure]] | * [[Media:Tek 485 cal proc.pdf|Tektronix 485 Calibration Procedure]] | ||
}} | }} | ||
Line 41: | Line 40: | ||
{{Spec | Deflection | 5 mV/div to 5 V/div in 1−2−5 sequence, 2% accuracy }} | {{Spec | Deflection | 5 mV/div to 5 V/div in 1−2−5 sequence, 2% accuracy }} | ||
{{Spec | Time Base | 1 ns/div to 0.5 s/div in 1−2−5 sequence}} | {{Spec | Time Base | 1 ns/div to 0.5 s/div in 1−2−5 sequence}} | ||
{{Spec | CRT | [[154-0652-00]] | {{Spec | CRT | P31: [[154-0652-00]] / [[154-0652-05]] (B091500+); P11 (Opt.78): [[154-0652-04]] / [[154-0652-09]] (B091500+); 21 kV acceleration, 8 × 10 divisions (0.8 cm/div)}} | ||
{{Spec | Calibrator | 5 V into 1 MΩ / 0.5 V into 50 Ω / 50 mA using optional loop adapter, 1 kHz or 1 MHz, rise time less than 1 ns, output resistance 450 Ω }} | |||
{{Spec | Outputs | Positive gates from both time bases (~4 V), positive-going sawtooth from Time Base A (~10 V) }} | |||
{{Spec | Weight | 9.3 kg (21.5 lb) }} | {{Spec | Weight | 9.3 kg (21.5 lb) }} | ||
{{Spec | Power | AC 90–136 or 180–272 V, 48–440 Hz, 60 W @ 115V }} | {{Spec | Power | AC 90–136 or 180–272 V, 48–440 Hz, 60 W @ 115V }} | ||
Line 47: | Line 48: | ||
==Links== | ==Links== | ||
* [https://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/485.html Tek 485 @ amplifier.cd] | * [https://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/485.html Tek 485 @ amplifier.cd] | ||
* [https://youtube.com/watch?v=7Qg6ory3L8Y 485 troubleshooting] @ YouTube | * [https://youtube.com/watch?v=7Qg6ory3L8Y 485 troubleshooting] by devttys0 @ YouTube | ||
* [https://www.youtube.com/watch?v=P56MyUK3n18 485 Restoration and Repair] | * [https://www.youtube.com/watch?v=P56MyUK3n18 485 Restoration and Repair] / [https://www.youtube.com/watch?v=95rlRAlRT5k 485 Power Supply and Tube Alignment] / [https://www.youtube.com/watch?v=mJa5jap968w 485 Horizontal Alignment] / [https://www.youtube.com/watch?v=lVsLMrCnOK4 485 Vertical and Trigger alignment] by Zenwizard Studios @ YouTube | ||
{{Documents|Link=485}} | |||
{{PatentLinks|485}} | |||
==Prices== | ==Prices== | ||
Line 62: | Line 61: | ||
! 1972 | ! 1972 | ||
! 1973 | ! 1973 | ||
! 1976 | |||
! 1980 | |||
! 1982 | |||
! 1986 | ! 1986 | ||
|- | |- | ||
! Catalog Price | ! Catalog Price | ||
| $4,200 | |align=right| $4,200 | ||
| $4,200 | |align=right| $4,200 | ||
| | |align=right| $4,550 | ||
|align=right| $6,035 | |||
|align=right| $6,975 | |||
|align=right| $9,100 | |||
|- | |- | ||
! In 2023 Dollars | ! In 2023 Dollars | ||
| $30,900 | |align=right| $30,900 | ||
| $29,100 | |align=right| $29,100 | ||
|align=right| $24,600 | |||
|align=right| $22,500 | |||
|align=right| $22,200 | |||
|align=right| $25,600 | |||
|} | |} | ||
Latest revision as of 04:40, 3 October 2024
The Tektronix 485 is a dual-trace, portable analog oscilloscope with a maximum bandwidth of 350 MHz, introduced in March of 1972.
The impedance of the inputs can be set individually to 50 Ω or 1 MΩ. The scope achieves its maximum bandwidth when the inputs are in 50 Ω mode.
A distinguishing feature – at least in a portable oscilloscope of its period – is the Alternate Horizontal Mode. In this mode, the B timebase is shown in a separate full-width scan, as opposed to the more common Mixed Mode, where the B timebase is shown on the same line as the A timebase, after the delay time.
The 465, which was introduced after the 485, only received this feature in its "B" incarnation (465B).
Variant 485-1 omits the "A EXT Trigger display", as does variant 485-2 which additionally only has 50 Ω inputs.
John Addis was project leader for the vertical section, assisted by Wink Gross. Glenn Bateman, Ron Peltola and Bob Firth designed the low- and high-impedance attenuators. Murlan Kaufman was project leader for the horizontal and logic systems and designed the trigger generator. Bob White designed the trigger amplifier and external trigger view circuits. Keith Taylor did the work on the fast sweeps, the horizontal and the Z-axis amplifiers. Dick Troberg designed the high efficiency power supply system.
Key Specifications
Input Impedance | 50 Ω / 1 MΩ // 20 pF |
---|---|
Rise time | 1 ns (50 Ω) / 1.4 ns (1 MΩ) |
Bandwidth | 350 MHz (50 Ω) / 250 MHz (1 MΩ) |
Deflection | 5 mV/div to 5 V/div in 1−2−5 sequence, 2% accuracy |
Time Base | 1 ns/div to 0.5 s/div in 1−2−5 sequence |
CRT | P31: 154-0652-00 / 154-0652-05 (B091500+); P11 (Opt.78): 154-0652-04 / 154-0652-09 (B091500+); 21 kV acceleration, 8 × 10 divisions (0.8 cm/div) |
Calibrator | 5 V into 1 MΩ / 0.5 V into 50 Ω / 50 mA using optional loop adapter, 1 kHz or 1 MHz, rise time less than 1 ns, output resistance 450 Ω |
Outputs | Positive gates from both time bases (~4 V), positive-going sawtooth from Time Base A (~10 V) |
Weight | 9.3 kg (21.5 lb) |
Power | AC 90–136 or 180–272 V, 48–440 Hz, 60 W @ 115V |
Links
- Tek 485 @ amplifier.cd
- 485 troubleshooting by devttys0 @ YouTube
- 485 Restoration and Repair / 485 Power Supply and Tube Alignment / 485 Horizontal Alignment / 485 Vertical and Trigger alignment by Zenwizard Studios @ YouTube
Documents Referencing 485
Document | Class | Title | Authors | Year | Links |
---|---|---|---|---|---|
Tekscope 1972 V4 N2 Mar 1972.pdf | Article | A Nanosecond Portable Oscilloscope | Gene Andrews | 1972 | 485 |
Patents that may apply to 485
Page | Title | Inventors | Filing date | Grant date | Links |
---|---|---|---|---|---|
Patent US 3906344A | Oscilloscope having selectable input impedances | John Addis • Ron Peltola | 1974-04-04 | 1975-09-16 | 485 |
Prices
Year | 1972 | 1973 | 1976 | 1980 | 1982 | 1986 |
---|---|---|---|---|---|---|
Catalog Price | $4,200 | $4,200 | $4,550 | $6,035 | $6,975 | $9,100 |
In 2023 Dollars | $30,900 | $29,100 | $24,600 | $22,500 | $22,200 | $25,600 |
Internals
The 485 includes a switching power supply and uses custom integrated circuits for most of the gain blocks. Triggering uses tunnel diodes.
Pictures
External
-
-
-
-
-
-
-
-
-
-
-
Time base A, External trigger display switch
-
Internals
-
Top, Horizontal Amp board
-
Underside, Power supply, A-Trig board
-
LHS, Vertical Amp board
-
RHS, Sweep/Inverter board
-
A-Trigger board
-
Vertical attenuator Assy
-
Vertical attenuator Assy, 50Ω Board
-
Vertical attenuator Assy, Hi-Z Board