User:Peter: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
<gallery> | <gallery> | ||
213 compared to 585.jpg | [[213]] | 213 compared to 585.jpg | [[213]] | ||
Tek-465-front.jpg | [[465]] | Tek-465-front.jpg | [[465]] − from the estate of a hobbyist | ||
Tek 502 with x-y display.jpg | [[502]] | Tek 502 with x-y display.jpg | [[502]] − spent many years in a university lab attached to strain gages watching metal samples being broken, at the end reduced to be a DSO pre-amp | ||
Tek-545A-front.jpg | [[545A]] | Tek-545A-front.jpg | [[545A]] − from a guy with a remarkable collection of early radios and phonographs | ||
Tek-549-front.jpg | [[549]] | Tek-549-front.jpg | [[549]] − looted for tubes by some Bavarian vulture, restored & nursed back to health by [[User:Matt|Matt]], additional minor repairs in my shop | ||
Tek-585-81-ca-front.jpg | [[585]] | Tek-585-81-ca-front.jpg | [[585]] − another university retiree | ||
Tek 2230 open.jpg | [[2230]] | Tek 2230 open.jpg | [[2230]] − this one had been working on the railroad ... | ||
Tek 7503 front.jpg | [[7503]] | Tek 7503 front.jpg | [[7503]] − worked in a plasma physics lab, then moved to the physics dept at a smaller university | ||
7603-4trace.jpg | [[7603]] (2) | 7603-4trace.jpg | [[7603]] (2) − one cured of GHz oscillations but infested with cabling gremlins, the other [https://wellenkino.de/557/viewtopic.php?p=3673 barely survived rough handling] | ||
Tek-7613-front.jpg | [[7613]] | Tek-7613-front.jpg | [[7613]] − my first 7k Tek | ||
Tek-7623A.jpg | [[7623A]] | Tek-7623A.jpg | [[7623A]] | ||
Tek 7633 front.jpg | [[7633]] | Tek 7633 front.jpg | [[7633]] − supposedly from a private museum | ||
Tek7844-front.jpg | [[7844]] | Tek7844-front.jpg | [[7844]] − my #1 go-to scope | ||
Tek_7854_rise_time.jpg | [[7854]] | Tek_7854_rise_time.jpg | [[7854]] − in great shape | ||
Tek-7904-front.jpg | [[7904]] (2) - worked for some time, PSU to be repaired | Tek-7904-front.jpg | [[7904]] (2) - worked for some time, PSU to be repaired | ||
Tek7104-front.jpg | [[7104]] | Tek7104-front.jpg | [[7104]] − tube worn but in decent shape overall | ||
Tek-sc504-am503.jpg | [[SC504]] | Tek-sc504-am503.jpg | [[SC504]] | ||
</gallery> | </gallery> | ||
Line 22: | Line 22: | ||
===Other Instruments=== | ===Other Instruments=== | ||
<gallery> | <gallery> | ||
308-timing.jpg | [[308]] | 308-timing.jpg | [[308]] − nobody else would pick it up at that hamfest | ||
</gallery> | </gallery> | ||
Revision as of 07:40, 5 December 2021
Scopes
-
465 − from the estate of a hobbyist
-
502 − spent many years in a university lab attached to strain gages watching metal samples being broken, at the end reduced to be a DSO pre-amp
-
545A − from a guy with a remarkable collection of early radios and phonographs
-
585 − another university retiree
-
2230 − this one had been working on the railroad ...
-
7503 − worked in a plasma physics lab, then moved to the physics dept at a smaller university
-
7603 (2) − one cured of GHz oscillations but infested with cabling gremlins, the other barely survived rough handling
-
7613 − my first 7k Tek
-
7633 − supposedly from a private museum
-
7844 − my #1 go-to scope
-
7854 − in great shape
-
7904 (2) - worked for some time, PSU to be repaired
-
7104 − tube worn but in decent shape overall
Other Instruments
-
308 − nobody else would pick it up at that hamfest
Carts, Cameras etc.
Plugins
500
7000
S
TM500
Probes
-
P6451 probe internal, PCB front
-
P6451 probe internal, PCB back
Other
-
1103 Probe power supply, front panel
Screen shots
-
Faster-than-light beam on 7104? Using a 067-0587-02 calibration fixture at maximum amplitude produces this trace spanning 1.2 Div horizontally at 200 ps/Div and 8 Div vertically. Trace length is (1.2² + 8²)½ × 8.5 mm = 68.8 mm, travelled in 1.2 × 200 ps = 240 ps. Apparent speed is therefore 68.8×10-3 / 240×10-12 m/s or 2.86×108 m/s. Very near miss ...
-
7104 rise time measurement. 150 ps risetime pulse from 067-0587-02 at 100 Hz repetition rate. Measured 240 ps (corrected for 150 ps fixture rise time: 190 ns = 1.8 GHz)
-
7104 rise time measurement as before, 1000 Hz repetition rate at same brightness settings.
-
7104 recording a single shot pulse (from 067-0587-02) at 200 ps/Div. Camera: Nikon D7000, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed.
-
7104 recording 1 GHz sine, single shot at 500 ps/Div. Camera: Nikon D7000, 50 mm f/1.4, ISO 3200, 1/2 s. CRT filter not removed. CRT amplification loss is evident around the center line.
-
BC337 on 7CT1N
-
P6230 Rise time without ground lead: 9.2 * 20 ps = 184 ps (equiv. to 1.9 GHz bandwidth)
-
P6230 Rise time - Effect of using the "low inductance" ground lead - rise time 400 ps, bandwidth 875 MHz
-
P6230 Rise time - Using the 250 mm alligator ground lead - severe pulse distortion, rise time ~3 ns (115 MHz)!
-
Classic readout board diagnostic display
-
Tektronix 067-0587-02, gain mode, in horizontal slot
-
Tektronix 067-0587-02, gain mode, in vertical slot
-
7B85 used for rise time measurement
-
7B85 used for rise time measurement
-
7B85 used for pulse width measurement
-
7B85 used for pulse period measurement
-
7B85 used for pulse period measurement
-
7S12 as a sampler displaying a 1 GHz signal (hi-res mode / storage)
-
7S12 as a sampler displaying a 1 GHz signal (hi-res mode / storage)
-
7S12 as a sampler displaying a 1 GHz signal (normal mode / non-storage)
-
7S12 displaying the incident pulse from an S-52 (nom. < 25 ps) through an S-6 head (nom. < 30 ps)
-
sub-millivolt triangle signal displayed through 7A22, BW=1 kHz
-
sub-millivolt triangle signal displayed through 7A22, BW=10 kHz
-
sub-millivolt triangle signal displayed through 7A22, BW=100 kHz
-
sub-millivolt triangle signal through 7A22, BW=1 MHz
-
Measuring diode reverse recovery
-
Diode reverse recovery, 20 mA/Div
-
Tunnel diode quick check example using the method from Service Scope 49. Right beam is zoomed with delayed timebase to show step speed.
-
308 display, timing mode (binary counter example)
-
308 display, state mode (binary counter example)