7S11: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(39 intermediate revisions by 4 users not shown)
Line 1: Line 1:
The Tektronix 7S11 is a [[sampling_oscilloscope|sampling]] plug-in for  
{{Plugin Sidebar
[[Main_Page#7000_Series|7000-series scopes]].
|manufacturer=Tektronix
It takes one sampling head, such as the [[S1]], [[S2]], [[S3]], [[S4]], [[S5]] or [[S6]]  
|series=7000-series scopes
to form a complete vertical plug-in.  The bandwidth and sensitivity is determined by the sampling head, not the plug-in.
|type=7S11
|summary=Sampling plugin
|image=7s11-s4.jpg
|caption=7S11 front view with [[S-4]] sampling head)
|introduced=1969
|discontinued=1990
|designers=George Frye;Al Zimmerman;Gene Cowan
|manuals=
* [[Media:070-0985-00.pdf|Tektronix 7S11 Manual]] (OCR)
* [[Media:TM-11-6625-2750-14&P.pdf|TM-11-6625-2750-14&P - 7S11 Operator/Service]]
}}
The '''Tektronix 7S11''' is a [[sampling oscilloscope|sampling]] plug-in for [[7000-series scopes]].
It was designed by [[George Frye]], [[Al Zimmerman]], and [[Gene Cowan]].
 
It takes one [[:7000 and 3S series sampling heads|S-series sampling head]], e.g. [[S-4]] or [[S-6]], to form a complete vertical plug-in.   
Bandwidth and sensitivity are determined by the sampling head, not the plug-in.


For operation a [[7T11]] plug-in is needed.  
For operation, a [[7T11]] or [[7S12]] plug-in is needed, to which the 7S11 connects through [[7000-series Sampling Shoe|contact strips on the right side of the plug-in]]. 
The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration.
An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay,
for an X-Y display in free-running mode (~50 kHz strobe).


* [http://w140.com/smb/7s11_sm.pdf Tektronix 7S11 Manual (OCR, PDF)]
The DC offset voltage as well as the vertical display signal are accessible on the front panel through [[Pin Tip]] jacks.
 
{{BeginSpecs}}
{{Spec | Deflection             | 2 to 200 in 1−2−5 sequence, unit as labelled on the sampling head (usually mV, except for the optical-input [[S-42]] scaled in mW) }}
{{Spec | DC offset              | ±1 V }}
{{Spec | Offset output          | 10 × offset voltage (±10 V), source impedance 10 kΩ, 2 mm [[Pin Tip]] connector}}
{{Spec | Vertical signal output | 200 mV/Div, max. 2.4 V<sub>p-p</sub>, source impedance 10 kΩ, 2 mm [[Pin Tip]] connector}}
{{Spec | Delay range            | at least 10 ns}}
{{Spec | Weight                | 0.9 kg (3.25 lbs) }}
{{EndSpecs}}
 
==Internals==
 
The 7S11 does not contain integrated circuits (except dual transistors).
 
==Links==
* [[Media:Tekscope 1970 V2 N1 Feb 1970.pdf|Tekscope Vol. 2 No. 1, Feb 1970]]
* [http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_special/7S11.htm Tektronix 7S11 @ amplifier.cd]
* [http://www.barrytech.com/tektronix/tek7000/tek7s11.html Tektronix 7S11 @ barrytech.com]
{{Documents|Link=7S11}}
 
==Pictures==


<gallery>
<gallery>
File:Tek 7s11 front.jpg
7s11-s4.jpg  | 7S11 with inserted [[S-4]] head
Image:7S11.jpg|7S11 with inserted S6 sampling head
Tek 7s11 front.jpg | 7S11 with empty plugin bay
File:Tek 7s11 spring contact.jpg
7S11.jpg | 7S11 with inserted [[S-6]] sampling head
File:Tek 7s11 right open.jpg
Tek 7s11 spring contact.jpg | spring-loaded contact block (right)
File:Tek 7s11 left open.jpg
Tek 7s11 right open.jpg| right side, cover removed
File:Tek 7s11 right.jpg
Tek 7s11 left open.jpg | left side, cover removed
File:Tek 7s11 left.jpg
Tek 7s11 right.jpg | right side
Tek 7s11 left.jpg | left side
Tek 7s11 s-1.jpg|7S11 with [[S-1]]
</gallery>
</gallery>
===Measurements===
<gallery>
7s11-1ghz-norm.jpg | 7S11, [[7T11]], [[S-4]] displaying a 1 GHz sine (normal mode)
7s11-1ghz-smooth.jpg | 7S11, [[7T11]], [[S-4]] displaying a 1 GHz sine (smooth mode)
7s11-1ghz-smooth-store.jpg | 7S11, [[7T11]], [[S-4]] displaying a 1 GHz sine (smooth mode, variable-persistence storage display of a [[7613]] mainframe)
7s12-7s11-1ghz-store.jpg | 7S11 used as 2nd channel with [[7S12]]
Tek 7633 7s11 7t11.jpg|Rackmount [[7633]] with two 7S11 and a [[7T11]] displaying a 2 GHz sinewave
Adf4351 4GHz 7s11 7t11a.jpg|[[7704A]] with 7S11 and 7T11A displaying 4 GHz sinewave
</gallery>
==Components==
{{Parts|7S11}}
[[Category:7000 series vertical plugins]]
[[Category:7000 series sampling plugins]]

Latest revision as of 15:03, 18 August 2024

Tektronix 7S11
Sampling plugin
7S11 front view with S-4 sampling head)

Compatible with 7000-series scopes

Produced from 1969 to 1990

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 7S11 is a sampling plug-in for 7000-series scopes. It was designed by George Frye, Al Zimmerman, and Gene Cowan.

It takes one S-series sampling head, e.g. S-4 or S-6, to form a complete vertical plug-in. Bandwidth and sensitivity are determined by the sampling head, not the plug-in.

For operation, a 7T11 or 7S12 plug-in is needed, to which the 7S11 connects through contact strips on the right side of the plug-in. The control signals are routed to a similar strip on the left of the module for another 7S11 in a dual-channel configuration. An alternative configuration consists of a pair of 7S11s, one in the right vertical and the other in the A or only horizontal bay, for an X-Y display in free-running mode (~50 kHz strobe).

The DC offset voltage as well as the vertical display signal are accessible on the front panel through Pin Tip jacks.

Key Specifications

Deflection  2 to 200 in 1−2−5 sequence, unit as labelled on the sampling head (usually mV, except for the optical-input S-42 scaled in mW)
DC offset ±1 V
Offset output 10 × offset voltage (±10 V), source impedance 10 kΩ, 2 mm Pin Tip connector
Vertical signal output 200 mV/Div, max. 2.4 Vp-p, source impedance 10 kΩ, 2 mm Pin Tip connector
Delay range at least 10 ns
Weight 0.9 kg (3.25 lbs)

Internals

The 7S11 does not contain integrated circuits (except dual transistors).

Links

Documents Referencing 7S11

Document Class Title Authors Year Links
Tekscope 1969 V1 N5 Oct 1969.pdf Article Introducing the New Generation 1969 7000-series scopes • 7504 • 7704 • 7A11 • 7A12 • 7A13 • 7A14 • 7A16 • 7A22 • 7S11 • 7M11 • 7B50 • 7B51 • 7B70 • 7B71 • 7T11 • R5030 • 7000 series readout system • Miniature relays • Cam switches • Industrial Design • T7500 • T7700 • P6052 • P6053 • C-50 • C-51 • 204-2
Tekscope 1969 V1 N6 Dec 1969.pdf Article A New Logic for Oscilloscope Displays 1969 7000-series scopes • 7A11 • 7A12 • 7A13 • 7A14 • 7A16 • 7A22 • 7B50 • 7B51 • 7B70 • 7B71 • 7S11 • 7T11 • 7504 • 7704
Tekscope 1970 V2 N1 Feb 1970.pdf Article Measuring Jitter with a Sampling Oscilloscope Al Zimmerman 1970 Sampling • 7T11 • 7S11
Tekscope 1970 V2 N1 Feb 1970.pdf Article Basic Sampling 1970 Sampling • 7T11 • 7S11 • 7M11
Tekscope 1971 V3 N2.pdf Article Measuring the Linearity of Fast Ramps John McCormick 1971 7S11 • 7T11 • 7A22 • P6034 • P6035 • P6051 • S-3A • S-5
7000 series brochure March 1973.pdf Brochure 7000 series brochure, March 1973 1973 7A11 • 7A12 • 7A13 • 7A14 • 7A15A • 7A16A • 7A17 • 7A18 • 7A19 • 7A21N • 7A22 • 7B50 • 7B53A • 7B70 • 7B71 • 7B92 • 7CT1N • 7D11 • 7D13 • 7D14 • 7D15 • 7M11 • 7L12 • 7S11 • 7S12 • 7T11 • 7704A • R7704 • 7904 • R7903 • 7603 • R7603 • 7403N • R7403N • 7313 • R7313 • 7613 • R7613 • 7623 • R7623 • P7001

Pictures

  • 7S11 with inserted S-4 head

    7S11 with inserted S-4 head

  • 7S11 with empty plugin bay

    7S11 with empty plugin bay

  • 7S11 with inserted S-6 sampling head

    7S11 with inserted S-6 sampling head

  • spring-loaded contact block (right)

    spring-loaded contact block (right)

  • right side, cover removed

    right side, cover removed

  • left side, cover removed

    left side, cover removed

  • right side

    right side

  • left side

    left side

  • 7S11 with S-1

    7S11 with S-1

Measurements

  • 7S11, 7T11, S-4 displaying a 1 GHz sine (normal mode)

    7S11, 7T11, S-4 displaying a 1 GHz sine (normal mode)

  • 7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode)

    7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode)

  • 7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode, variable-persistence storage display of a 7613 mainframe)

    7S11, 7T11, S-4 displaying a 1 GHz sine (smooth mode, variable-persistence storage display of a 7613 mainframe)

  • 7S11 used as 2nd channel with 7S12

    7S11 used as 2nd channel with 7S12

  • Rackmount 7633 with two 7S11 and a 7T11 displaying a 2 GHz sinewave

    Rackmount 7633 with two 7S11 and a 7T11 displaying a 2 GHz sinewave

  • 7704A with 7S11 and 7T11A displaying 4 GHz sinewave

    7704A with 7S11 and 7T11A displaying 4 GHz sinewave

Components

Some Parts Used in the 7S11

Part Part Number(s) Class Description Used in
151-0261-00 151-0261-00 Discrete component dual PNP transistor AM501 • AM502 • CG5001 • CG551AP • FG501 • FG502 • FG503 • OF150 • OF151 • OF152 • OF235 • OS261 • RM502A • R1140 • R5030 • R5031 • R7912 • 067-0679-00 • 067-0807-00 • 1101 • 1140A • 1141 • 1142 • 1350 • 145 • 1450 • 1480 • 1481 • 1482 • 1485 • 1501 • 1801 • 1900 • 1910 • 1980 • 213 • 26A1 • 26A2 • 2620 • 285 • 3A9 • 3A10 • 3S1 • 3S2 • 3S5 • 3S6 • 432 • 434 • 4501 • 454 • 4601 • 4602 • 4610 • 4612 • 4620 • 4632 • 4634 • 4701 • 475 • 492 • 492A • 492AP • 494 • 494P • 496 • 496P • 5A13N • 5A20N • 5A21N • 5A22N • 5A26 • 5L4N • 502A • 5030 • 5031 • 576 • 690SR • 7A22 • 7A29 • 7B51 • 7B71 • 7J20 • 7L5 • 7S11 • 7S12 • 7912AD
155-0035-00 155-0035-00 • 155-0116-00 Monolithic integrated circuit quad op-amp 3110 • 3S7 • 3T7 • 492 • 492A • 492AP • 492P • 494 • 494P • 496 • 496P • 4010 • 4011 • 4012 • 4013 • 7L5 • 7L12 • 7L13 • 7L14 • 7L18 • 7S11 • 7T11 • 7S12 • S-6 • 1461 • 4602 • P7001 • 613 • 653
Retrieved from "https://w140.com/tekwiki/index.php?title=7S11&oldid=96742"